Mounting the Bar Speaker on a Wall

Mount the bar speaker under the TV mounted on the wall.

Bar speaker

Note

  • Make sure to use the supplied wall mounting brackets when mounting the bar speaker on a wall. Do not mount the bar speaker directly onto a wall. Doing so can cause the temperature inside the bar speaker to rise considerably, and this may cause damage to the bar speaker or malfunction.
  • Attach the wall mounting brackets flat against the reinforced wall.
  • Ask a Sony dealer or licensed contractor to install the bar speaker securely with full consideration of safety.
  • Sony shall not be held responsible for accidents or damage caused by improper installation, lack of installation strength, misuse, or natural disaster.
  • Two or more persons are required to hang the bar speaker for safety.
  1. Prepare two screws (not supplied) that are suitable for the holes on the wall mounting bracket (supplied).

    The type and length of screws should be selected according to the wall to which they are to be installed.

    Illustration indicating the dimensions of a screw. (a) represents the diameter of the screwhead. (b) represents the diameter of the screw. (c) represents the length of the screw excluding the head.

    (a) 6 mm to 9.5 mm (1/4 in to 3/8 in)

    (b) 4 mm (3/16 in)

    (c) Longer than 30 mm (1 3/16 in) (approx.)


    Reference: Hole on the wall mounting bracket

    Illustration indicating the dimensions of the hole on the wall mounting bracket. (d) represents the width of the upper part of the hole. (e) represents the width of the lower part of the hole.

    (d) 5.0 mm (13/64 in)

    (e) 10 mm (25/64 in)

    Note

    • Prepare screws (not supplied) that are suitable for the wall material and stability. The screw may damage the wall depending on the wall material.
  2. Measure the depth of the mounted TV (f) and find out the required space between the bottom of the TV and the top of the bar speaker (g).

    Space is required to ensure that the TV does not interfere with the output surround sound from the bar speaker towards the ceiling.

    TV

    Bar speaker

    Depth of the mounted TV (f) Required space between the bottom of the TV and the top of the bar speaker (g)
    Shorter than 85 mm (3 3/8 in) 120 mm (4 3/4 in) or longer
    85 mm (3 3/8 in) or longer 200 mm (7 7/8 in) or longer
  3. Align the vertical line above the “ TV CENTER LINE” printed on the WALL MOUNT TEMPLATE (supplied) with the center of the width of your TV.

    Center of the TV

    WALL MOUNT TEMPLATE

  4. Align the “ BAR SPEAKER TOP LINE” printed on the WALL MOUNT TEMPLATE with the bottom of the required space between the bottom of TV and the top of the bar speaker (g) measured in step 2, then adhere the WALL MOUNT TEMPLATE on the wall with a commercially available adhesive tape, etc.

    WALL MOUNT TEMPLATE

    Adhesive tape, etc.

    Note

    • When adhering the WALL MOUNT TEMPLATE on the wall, smooth it out fully.
  5. Fasten the screws prepared in step 1 securely into the screw marks on the “ SCREW LINE” printed on the WALL MOUNT TEMPLATE.

    BRAVIA Theatre Bar 9

    Illustration indicating screw fastening position and fastening method. (h) represents the width of the two screw mounting positions. (i) represents the distance from the center of the template to the screw attachment point. (j) represents the length from the bottom of the screw head to the wall. (k) represents the length from the top surface of the bar speaker to the screw attachment point.

    Screws

    Marks

    (h) 1 056 mm (41 5/8 in)

    (i) 528 mm (20 3/4 in)

    (j) 3.5 mm to 4.5 mm (5/32 in to 3/16 in)

    (k) 30 mm (1 3/16 in)


    BRAVIA Theatre Bar 8

    Illustration indicating screw fastening position and fastening method. (h) represents the width of the two screw mounting positions. (i) represents the distance from the center of the template to the screw attachment point. (j) represents the length from the bottom of the screw head to the wall. (k) represents the length from the top surface of the bar speaker to the screw attachment point.

    Screws

    Marks

    (h) 876 mm (34 1/2 in)

    (i) 438 mm (17 1/4 in)

    (j) 3.5 mm to 4.5 mm (5/32 in to 3/16 in)

    (k) 30 mm (1 3/16 in)

    Note

    • Fasten the screws securely in the wall beam.
  6. Remove the WALL MOUNT TEMPLATE.
  7. Hang the wall mounting brackets (supplied) on the screws, then fasten the screws to fix the wall mount brackets to the wall.

    Wall mounting bracket

  8. Connect cables to the bar speaker.
    1. Connect the HDMI cable (supplied) to the HDMI OUT (TV (eARC/ARC)) jack on the bar speaker.
    2. Connect the AC power cord (mains lead) (supplied) to the AC inlet on the bar speaker.

    AC power cord (mains lead)

    HDMI cable

  9. Put the bar speaker on the wall mounting brackets.

  10. Align the positions of the screw holes on the bottom of the bar speaker and holes of the wall mounting bracket, then fix the bar speaker to the wall mounting brackets by fastening the screws (supplied) securely.

    Wall mounting bracket

    Screw

    Bottom of the bar speaker

  11. Connect the HDMI cable (supplied) connected to the bar speaker to the eARC/ARC HDMI input jack on the TV.
  12. Connect the AC power cord connected to the bar speaker to the AC outlet (mains).
  13. Perform [Sound Field Optimization](*) on the app in the following cases.
    • When changing the position and installation method of the speaker system as well as the optional rear speakers and subwoofer
    • When changing the viewing environment, such as changing the layout of furniture
    • When changing the position of daily viewing

    *Displayed when you tap [Settings] - [Sound Settings] - [Sound Field Optimization] on the remote control screen on the app.

Mounting the optional speakers on a wall

Refer to the operating instructions of the optional speakers.

TP1001324611