Specifications
Sound Bar (YY2083C/ YY2082C)
Front speaker section
Speaker
45 mm × 90 mm (1 13/16 in × 3 5/8 in) cone type
Speaker system
YY2083C：
Passive Radiator
YY2082C：
Acoustic suspension
Center speaker section
Speaker
45 mm × 90 mm (1 13/16 in × 3 5/8 in) cone type
Speaker system
YY2083C：
Passive Radiator
YY2082C：
Acoustic suspension
Front tweeter section
Speaker
10 mm (13/32 in) soft dome type
Center tweeter section
Speaker
22 mm (7/8 in) soft dome type
Top speaker section
Speaker
46 mm × 54 mm (1 13/16 in × 2 1/4 in) cone type
Speaker system
Acoustic suspension
Side speaker section
Speaker
46 mm × 54 mm (1 13/16 in × 2 1/4 in) cone type
Speaker system
Acoustic suspension
Beam tweeter section (YY2083C only)
Speaker
16 mm (21/32 in) soft dome type
Speaker system
Acoustic Tube
Wireless LAN section
Communication system
IEEE 802.11 a/b/g/n/ac
Frequency band
2.4 GHz, 5 GHz
BLUETOOTH section
Communication system
BLUETOOTH Specification version 5.2
Output
BLUETOOTH Specification Power Class 2
Maximum communication range
Line of sight approx. 30 m (98.4 ft)*
* The actual range will vary depending on factors such as obstacles between devices, magnetic fields around a microwave oven, static electricity, cordless phone use, reception sensitivity, the operating system, software applications, etc.
Maximum number of devices to be registered
9 devices: BLUETOOTH Low Energy (Connection with Sony | BRAVIA Connect)
9 devices: BLUETOOTH Classic (A2DP)
Frequency band
2.4 GHz band (2.400 0 GHz - 2.483 5 GHz)
Modulation method
FHSS (Freq Hopping Spread Spectrum)
Compatible BLUETOOTH profile*
* A BLUETOOTH profile standardizes functions according to the characteristics of BLUETOOTH devices.
A2DP (Advanced Audio Distribution Profile)
AVRCP (Audio Video Remote Control Profile)
Supported codec*
* Codec is an audio signal compression and conversion format.
SBC (Subband Codec)
AAC (Advanced Audio Coding)
LDAC™*
* LDAC is an audio coding technology developed by Sony that enables the transmission of High-Resolution (Hi-Res) Audio content, even over a BLUETOOTH connection.
Corresponding content protection
SCMS-T
Transmission range (A2DP)
20 Hz - 40 000 Hz (LDAC sampling frequency 96 kHz with 990 kbps transmission)
20 Hz - 20 000 Hz (Sampling frequency 44.1 kHz)
Note
- Depending on the network environment, there may be an interruption at the high bitrate transmission.
HDMI section
Connector
Type A (19pin)
General
Input
HDMI IN
Output
HDMI OUT (TV eARC/ARC)
S-CENTER OUT
Power consumption
YY2083C：
On: 62 W
Network standby mode ([Network/Bluetooth Standby] is set to ON): 2.3 W or less
Standby mode ([Network/Bluetooth Standby] is set to OFF): 0.5 W or less*
YY2082C：
On: 60 W
Network standby mode ([Network/Bluetooth Standby] is set to ON): 2.3 W or less
Standby mode ([Network/Bluetooth Standby] is set to OFF): 0.5 W or less*
* When [Standby Through] is set to OFF, or [Standby Through] is set to [Auto] while the connected TV is turned off.
When the [Auto Standby] function is enabled, if the speaker system is not being operated and there is no signal input for about 20 minutes, the speaker system automatically enters the network standby mode or standby mode.
Disabling the [Auto Standby] function will increase the power consumption of this speaker system.
Dimensions* (approx.) (w/h/d)
* Not including projection portion
YY2083C：
Sound Bar:
1 300 mm × 64 mm × 113 mm (51 1/4 in × 2 5/8 in × 4 1/2 in)
Sound Bar with the Wall mounting bracket:
1 300 mm × 65.4 mm × 123 mm (51 1/4 in × 2 5/8 in × 4 7/8 in)
Sound Bar with the Foot:
1 300 mm × 76.2 mm × 113 mm (51 1/4 in × 3 in × 4 1/2 in)
YY2082C：
Sound Bar:
1 100 mm × 64 mm × 113 mm (43 3/8 in × 2 5/8 in × 4 1/2 in)
Sound Bar with the Wall mounting bracket:
1 100 mm × 65.4 mm × 123 mm (43 3/8 in × 2 5/8 in × 4 7/8 in)
Sound Bar with the Foot:
1 100 mm × 76.2 mm × 113 mm (43 3/8 in × 3 in × 4 1/2 in)
Mass (approx.)
YY2083C：
Sound Bar:
5.5 kg (12 lb 3 oz)
Sound Bar with the Wall mounting bracket:
5.8 kg (12 lb 13 oz)
Sound Bar with the Foot:
5.5 kg (12 lb 3 oz)
YY2082C：
Sound Bar:
4.7 kg (10 lb 6 oz)
Sound Bar with the Wall mounting bracket:
5 kg (11 lb 1 oz)
Sound Bar with the Foot:
4.7 kg (10 lb 6 oz)
Wireless transmitter/receiver section
Communication system
Wireless Sound Specification version 4.0
Frequency band
5 GHz
Modulation method
OFDM
Note
- Design and specifications are subject to change without notice.
- Refer to the Reference Guide included with your product, which may contain specification information not listed above.