Installing the Bar Speaker on a TV Stand and Shelves

Install the bar speaker in an open space in front of the TV so that the top of the bar speaker overlaps the TV and does not hide the TV screen or the remote control sensor on the TV.

If the bar speaker can be installed without interfering with the TV legs

Example of installation with a TV with two TV legs on either side

Illustration indicating the bar speaker installed between the TV legs

Bar speaker

Example of installation with a TV with wide TV legs in the center

Illustration ilndicating the bar speaker installed in front of the TV leg

Bar speaker

If the bar speaker cannot be installed due to interference with the TV legs

By attaching the supplied foot to the bar speaker, the bar speaker can be raised above the installation surface, thus avoiding interference with the TV legs.

Attaching of the foot does not improve sound quality.

If the TV leg size corresponds to the following, the speaker system can be installed by attaching the foot.

(a) Spacing between TV legs: 800 mm (31 1/2 in) or less

(b) TV leg height: 8.5 mm (11/32 in) or less

  1. Prepare what are needed.

    • Feet (2) (supplied)

    • Screws (2) (supplied)

    • Phillips screwdriver (not supplied)

  2. Attach the foot to the bar speaker.

    Install the foot according to the following procedure.

    • Place the bar speaker with the bottom of the bar speaker facing up.
    • Position the foot by fitting the projecting part on the inside of the foot into the hole for the foot projecting part next to the screw hole on the bar speaker.
    • Secure the foot with the screw.

    Projecting part

    Screw hole

    Hole for the foot projecting part

    Screw (supplied)

  3. Install the bar speaker.

    Be careful not to cover the remote control sensor on the TV with the bar speaker.
    After installation, check that the TV can be turned on/off with the TV remote control.

  4. Perform [Sound Field Optimization](*) on the app in the following cases.
    • When changing the position and installation method of the speaker system as well as the optional rear speakers and subwoofer
    • When changing the viewing environment, such as changing the layout of furniture
    • When changing the position of daily viewing

    *Displayed when you tap [Settings] - [Sound Settings] - [Sound Field Optimization] on the remote control screen on the app.

Note

  • Do not place metal objects near the speaker system. Wireless functions may become unstable.
  • Do not cover the top of the bar speaker. It may interrupt the sound output from the top of the bar speaker.
  • There are ventilation holes at the rear of the bar speaker. Place the bar speaker away from a TV or a wall at a distance of 10 mm (13/32 in) or more.
TP1001494953