Specifications

Section for Speaker

Speakers
Tweeter: Organic glass cylinder type
Woofer: Approx. 50 mm dia. (2 in dia.)
Enclosure type
Passive radiator model
Frequency band
60 Hz – 40,000 Hz

Section for Amplifier

For USA:
Using AC adapter (Woofer Only):
(FTC)
With 6 ohm loads, from 60 Hz to 3 kHz;
rated 11 W minimum RMS power, with no more than 0.7% THD from 250 mW to rated output.
Power output (reference)
13 W (6 ohms, 1 kHz)
Using battery (Woofer Only):
(FTC)
With 6 ohm loads, from 60 Hz to 3 kHz;
rated 5 W minimum RMS power, with no more than 1.0% THD from 70 mW to rated output.
Power output (reference)
6 W (6 ohms, 1 kHz)
For Canada/European countries:
Using AC adaptor (Woofer Only):
Power output (rated)
11W (6 ohms, 1 kHz, 1% THD)
Power output (reference)
13 W (6 ohms, 1 kHz)
Using battery (Woofer Only):
Power output (rated)
5W (6 ohms, 1 kHz, 1% THD)
Power output (reference)
6 W (6 ohms, 1 kHz)
Number of outputs
4 CH (tweeter: 3 CH, woofer: 1 CH)

Section for BLUETOOTH

Communication System
BLUETOOTH Specification Version 3.0
Output
BLUETOOTH Specification Power Class 2
Maximum communication range
Line of sight Approx. 10 m*1
Radio frequency
2.4 GHz band (2.4000 GHz – 2.4835 GHz)
Modulation method
FHSS
Compatible BLUETOOTH Profiles*2
A2DP (Advanced Audio Distribution Profile) / AVRCP (Audio Video Remote Control Profile)
Supported codecs*3
SBC*4 / AAC*5 / aptX / LDAC*6
Transmission bandwidth (A2DP)
20 Hz – 20,000 Hz (with 44.1 kHz sampling) / 20 Hz - 40,000 Hz (with LDAC 96 kHz sampling, 990 kbps)

*1 The actual range will vary depending on factors such as obstacles between devices, magnetic fields around a microwave oven, static electricity, reception sensitivity, aerial’s performance, operating system, software application, etc.

*2 BLUETOOTH standard profiles indicate the purpose of BLUETOOTH communication between devices.

*3 Codec: Audio signal compression and conversion format

*4 Subband Codec

*5 Advanced Audio Coding

*6 LDAC is an audio coding technology for “High Resolution (Hi-Res) Audio” developed by Sony, which operates at 990 - 303 kbps (*7) with the sampling rates of 96/88.2/48/44.1 kHz.
It is optimized for high sampling rate and high bit rate coding, and allows for a transmission of Hi-Res Audio content even through BLUETOOTH connection while maintaining sound quality almost equivalent to its original under a stable wireless network environment. It also provides high coding efficiency at low sampling rates and low bit rates, enabling a CD quality audio transmission even with an unstable wireless connection.

*7 When the sampling rate is 96 kHz or 48 kHz, it operates at 990 - 330 kbps.
When the sampling rate is 88.2 kHz or 44.1 kHz, it operates at 909 - 303 kbps.

General

AUDIO IN
ANALOG Φ 3.5 mm stereo mini jack
Power
DC 19.5 V (using the supplied AC adaptor connected to AC 100V-240V power supply), or using built in lithium-ion battery
Power consumption (when using the AC adaptor)
  • Approx. 20 W (when charging, max. brightness setting for illumination)
  • Approx. 6 W (when charging is complete, max. brightness setting for illumination)
  • Approx. 1.1 W (when Auto Power Save function is active, illumination off)
  • Approx. 1.9 W (when Auto Power Save function is active, max. brightness setting for illumination)
  • Approx. 0.4 W (when in normal standby)
Usage life of lithium-ion battery (when BLUETOOTH is connected)
Approx. 4 hours*8
Charging time for lithium-ion battery
Approx. 2 hours*8
Operating temperature
5 °C to 35 °C (41 °F to 95 °F)
Dimensions (including projecting parts and controls)
Approx. 82 mm dia. × 303 mm (3 1/4 in dia. × 12 in)
Mass
Approx. 920 g (32.5 oz) (including rechargeable battery)

*8 Depending on the ambient temperature and circumstances of use, the actual duration may be different.
Design and specifications are subject to change without notice.

Go to Page Top