Location and function of parts

The headset is composed of 10, which is in an arched shape, with 1 to the left unit side, 11 to the right unit side, and 9 and 3 above both units. Both the left and right units have 5. 2 is located on the underside of 3 on the left unit. 6 is built into the left unit (8). 4, 7, 14, 15, 16, 17, 18, and 19 are located along the edge of the left unit. The right unit (13) has 12 on its flat surface.

  1. (left) mark

  2. Serial number

    Located on the underside of the left unit hanger.

  3. Hangers

  4. Tactile dot

    There is a tactile dot on the left unit.

  5. Noise canceling function microphones (external) (left, right)

    Picks up the sound of the noise when the noise canceling function is in use.

  6. Built-in antenna

    A Bluetooth antenna is built into the headset.

  7. Call microphone (left)

    Picks up the sound of your voice when talking on the phone.

  8. Left unit

  9. Sliders

  10. Headband

  11. (right) mark

  12. Touch sensor control panel

    Remotely controls music playback of the connected Bluetooth device or performs other operations using touch operation.

  13. Right unit

  14. NC/AMB (noise canceling/Ambient Sound Mode) button

  15. ULT button

  16. (power)/ (Bluetooth) button

  17. Indicator (orange/blue)

    Lights up in orange or blue to indicate the battery or communications status of the headset.

  18. USB Type-C port

    Connect the headset to a computer, or to an AC outlet via a commercially available USB AC adaptor, with the supplied USB Type-C cable to charge the headset.

  19. Headphone cable input jack

    Connect a music player, etc. using the supplied headphone cable. Make sure that you insert the cable until it clicks. If the plug is not connected correctly, you may not hear the sound properly.