Pairing and connecting with an iPhone

The operation to register the device that you wish to connect to is called “pairing”. First, pair a device to use it with the headset for the first time.

Before starting the operation, make sure of the following:

  • The iPhone is placed within 1 m (3.2 ft) of the headset.
  • The headset is charged sufficiently.
  • The operating instructions for the iPhone is in hand.
  1. Enter pairing mode on this headset.

    Turn on the headset when you pair the headset with a device for the first time after you bought it or after you initialized the headset (the headset has no pairing information). The headset enters pairing mode automatically. In this case, proceed to step 2.

    When you pair a second or subsequent Bluetooth device (the headset already has pairing information for other devices), press and hold the (Bluetooth) button (A) for about 5 seconds or more to enter pairing mode manually.

    Illustration indicating the location of A

    The indicator (blue) repeatedly flashes twice in a row. You will hear the voice guidance say, “Pairing”.

  2. Unlock the screen of the iPhone if it is locked.
  3. On your iPhone screen, go to [Settings] and touch [Bluetooth].

  4. Touch the switch to turn on the Bluetooth function.

  5. Touch [ULT WEAR].

    If Passkey* input is required, input “0000”.

    The headset and iPhone are paired and connected with each other.

    You will hear a notification sound indicating that the connection is established.

    If they are not connected, see “Connecting to a paired iPhone ”.

    If [ULT WEAR] does not appear on the display of the iPhone, try again from step 3.

    *A Passkey may be called “Passcode”, “PIN code”, “PIN number”, or “Password”.

Hint

Note

  • If pairing is not established within 5 minutes, pairing mode is canceled. In this case, turn off the power and start the operation again from step 1.
  • Once Bluetooth devices are paired, there is no need to pair them again, except in the following cases:
    • Pairing information has been deleted after repair, etc.
    • When a 9th device is paired
      The headset can be paired with up to 8 devices. If a new device is paired after 8 devices are already paired, the registration information of the paired device with the oldest connection date is overwritten with the information for the new device.
    • When the pairing information for the headset has been deleted from the connected Bluetooth device
    • When the headset is initialized
      All of the pairing information will be deleted. In this case, delete the pairing information for the headset from the connected device and then pair them again.
  • The headset can be paired with multiple devices, but can only play music from 1 paired device at a time.