Making a call

You can enjoy a hands-free call with a smartphone or mobile phone that supports the Bluetooth profile HFP (Hands-free Profile) or HSP (Headset Profile), via Bluetooth connection.

  • If your smartphone or mobile phone supports both HFP and HSP, set it to HFP.
  • The operation may vary depending on the smartphone or mobile phone. Refer to the operating instructions supplied with the smartphone or mobile phone.
  • Depending on the connected device or the application you are using, the functions may not work properly even if you try to operate them with the headset.
  1. Connect the headset to a smartphone/mobile phone via Bluetooth connection.
  2. Operate your smartphone or mobile phone to make a call.

    When you make a call, the dial tone is heard from the headset.

    If you make a call while listening to music, playback pauses.

    If no dial tone is heard via the headset, switch the call device to the headset by using your smartphone or mobile phone or by pressing and holding the (call) button for about 2 seconds.

    You can talk using the microphone on the headset.

    Illustration indicating the location of the microphone (A) on the remote control component on the left side

    A: Microphone on the remote control component

  3. Adjust the volume by pressing the +/– buttons of the headset.

    When the volume reaches the maximum or minimum, an alarm sounds.

  4. When you finish your phone call, press the (call) button on the headset to end the call.

    If you made a call during music playback, music playback resumes automatically after ending the call.

Hint

  • Volume for a call can be adjusted during a telephone conversation only.
  • The headset volume during a call and during music playback can be independently adjusted. Changing the call volume does not change the volume of music playback and vice versa.

Note

  • Depending on the connected device or playback application you are using, when you make a call while listening to music, playback may not resume automatically even after you finish the call.
  • Use a smartphone or mobile phone at least 50 cm (19.69 in.) away from the headset. Noise may result if the smartphone or mobile phone is too close to the headset.
  • Your voice will be heard from the headset through the headset’s microphone (Sidetone function). In this case, ambient sounds or the sounds of the headset operation may be heard through the headset, but this is not a malfunction.
  • If the headset’s microphone rubs against your clothing, etc., noise may interfere with your voice on the call. When talking on the phone, change the direction of the remote control component so that the microphone’s audio capture hole does not touch your clothing, etc.
Go to Page Top