Location and function of parts
Main unit
- N-Mark
Use to connect to the one-touch connection (NFC) supported device via BLUETOOTH. -
/
/
(Power, Answer, Play/Pause) button
Press to turn on/off the main unit, receive a call, register BLUETOOTH devices (pairing), and play/pause music. -
(Micro-USB) port
Use to charge the main unit. Be sure to close the port cover tightly when not used. - Lock lever
Turn to the [LOCK] side when attaching the main unit to a helmet with the adhesive mount and turn to the [RELEASE] side when releasing the main unit. - Adhesive mount attaching part
- Leash cord attaching slot
To avoid falling or losing the main unit, using the supplied leash cord is recommended. Lace the leash cord through this slot and tie it to the strap on the helmet, etc. as shown below. If the leash cord is too long, cut it to adjust the length.
11. Leash cord - Actuator
Transmits vibrations to the helmet. - RESET button
Press with a pen, etc. to reset if the main unit does not operate properly. Do not use sharp pointed objects such as a safety pin. -
(Power) lamp
Lights up in blue and red to indicate the power status and communication status. -
(Microphone) jack
Connect a microphone (supplied) for Group Talk or hands free call.
Remote control
- Operation lamp
Lights up in blue and red to indicate the power status and communication status. - +/- (volume) button
-
/
(Answer, Play/Pause) button
Press to receive a call and play/pause music. - ATT/EQ (Attenuate/Equalizer) button
Press to turn down the volume temporarily (Attenuate) and set the sound quality (Equalizer). -
/
(Previous/Next) button
Press to skip to the previous/next song while music is being played/paused.
Press and hold to fast rewind/fast forward. Release the button to return to normal play. - TALK button
Press to register multiple devices as a group, and start/finish Group Talk. - RESET button
Press with a pen, etc. to reset if the remote control does not operate properly. Do not use sharp pointed objects such as a safety pin. - Belt loop