Listening to music from a device via BLUETOOTH connection
You can enjoy listening to music and basic remote control operation of a BLUETOOTH device via a BLUETOOTH connection. The BLUETOOTH device is required to support the following BLUETOOTH profiles.
- A2DP (Advanced Audio Distribution Profile):
enables you to enjoy high-quality audio content wirelessly. - AVRCP (Audio Video Remote Control Profile):
enables you to adjust volume, etc.
The operation may vary depending on the BLUETOOTH device. Refer to the operating instructions supplied with your BLUETOOTH device.
- Connect the main unit to a BLUETOOTH device.
- Wear the helmet with the main unit attached.
- Play music on the BLUETOOTH device.
Adjust the volume on the BLUETOOTH device.
- Adjust the volume by pressing the +/- (volume) button on the remote control.
When the volume reaches the maximum or minimum, an alarm sounds.
You can operate on the remote control to play/pause, skip to the previous/next song, and fast rewind/fast forward.
To turn down the volume at once (Attenuate)
Press the ATT/EQ (Attenuate/Equalizer) button once.
To return to the original volume, press the button again, or press the + (volume) button on the remote control.
Hint
- The NYSNO-10 supports the SCMS-T content protection. You can enjoy music, etc., from a device such as a mobile phone that supports SCMS-T content protection.
- Depending on the BLUETOOTH device, it may be necessary to adjust the volume or set the audio output setting on the BLUETOOTH device.
- Volume during a call and volume during music playback can be adjusted independently. Changing the call volume does not change the volume of music playback, and vice versa.
Note
- If the communication condition is poor, the BLUETOOTH device may react incorrectly to the operation on the main unit.
