Notes on water resistant feature
On water resistant performance of the speaker
With the cap securely closed, this speaker has a water resistant performance equivalent to IPX4 (*1) (only when the speaker is placed vertically), which is a “protection against ingress of water” rating defined by IEC 60529 “Degrees of protection provided by enclosures (IP Code)” (*2) for electrical equipment. When placed horizontally, this speaker is not water resistant.
Liquids that the water resistant performance specifications apply to
| Applicable | fresh water, tap water |
| Not applicable | liquids other than the above (soapy water, water with detergent or bath agents, shampoo, pool water, hot spring water, salt water, etc.) |
(*1) IPX4 equivalency: The speaker maintains its performance while subjected to water sprinkled from every direction. This means that no trace of water is found inside the speaker after a 10-minute test with water of 10 L/min sprinkled from a distance of 300 mm to 500 mm (11 7/8 in to 19 3/4 in) in every direction.
(*2) The supplied accessories and the connectors of this speaker are not water resistant. To reduce the risk of fires or electric shocks, do not expose the speaker to water or droplets while using any connectors.
The water resistant performance of the speaker is based on our measurements under the conditions herein described. Note that malfunctions as a result of water immersion or dust intrusion caused by misuse by the customer are not covered by the warranty.
To maintain water resistant performance
Carefully note the precautions below to ensure proper use of the speaker.
-
This speaker does not have a design that is resistant to water pressure. Do not put the speaker in the water or directly under the water gushing out of the faucet to avoid a malfunction.
-
Do not pour high-temperature water or blow hot air from a hair dryer or any other appliance on the speaker directly. Also never use the speaker in a place subject to high temperatures, such as in a sauna or near a heat source.
-
Handle the cap on the rear side of the speaker with care. The cap plays a very important role in maintenance of the water resistant performance. When using the speaker, make sure that the cap is closed completely. When closing the cap, be careful not to allow foreign objects inside. If the cap is not closed completely the water resistant performance may deteriorate and may cause a malfunction of the speaker as a result of water entering the speaker.
