No sound/Sound from only one speaker/Distorted sound/Humming or noise in the speaker output
-
Check that both the speaker and the connected device are turned on.
-
Turn up the volume of the speaker and the connected device.
-
Depending on the connected BLUETOOTH device, volume adjustment on the BLUETOOTH device may not change the volume level of the speaker (i.e. the(power) indicator does not flash).
When the volume of the speaker sounds low, adjust the volume level of the BLUETOOTH device to an appropriate one, and then adjust the volume level of the speaker with -/+ (volume) on the speaker.
-
Check that the connected device is playing.
-
Select BLUETOOTH, OPTICAL IN, AUDIO IN, or USB mode in accordance with the desired audio source for playback.
-
Make sure the audio cable is firmly connected to the AUDIO IN jack during playback in AUDIO IN mode.
-
If the speaker is in OPTICAL IN mode and playback is in progress, make sure that the optical digital audio cable is firmly plugged in the OPTICAL IN connector.
-
If you are connecting a computer to the speaker, make sure the audio output setting of the computer is set for a BLUETOOTH device.
-
Check that the speaker has established BLUETOOTH connection with the BLUETOOTH device.
-
Pair the speaker and the BLUETOOTH device again.
-
Before connecting multiple speakers via BLUETOOTH connection for the Stereo Pair function or the Party Connect function, update the pre-installed software to the latest version on each and every speaker.
-
If the device that is connected to the AUDIO IN jack is monaural, sound may only be output from the left speaker component (left channel).
-
If the connected device has an equalizer function, set it to off.
-
Keep the speaker away from a microwave oven, wireless LAN, etc.
-
Bring the BLUETOOTH device closer to the speaker. If there is any obstacle between the speaker and the BLUETOOTH device, move it out of the way.
-
If the CHARGE indicator flashes slowly, turn off the speaker and charge the built-in battery sufficiently.
-
A device with a built-in radio or tuner cannot be connected to the speaker via BLUETOOTH since noise may occur in broadcasts.
-
Locate the speaker farther away from a TV, radio or tuner, etc. since noise may occur in broadcasts.
-
When using the Stereo Pair function or Party Connect function, if any other BLUETOOTH device(s) such as a BLUETOOTH mouse or BLUETOOTH keyboard is connected to the BLUETOOTH device, terminate the connection between them.
-
There are some BLUETOOTH devices that can have the BLUETOOTH connection quality changed. If your device is compatible with this function, select “Priority on Stable Connection (SBC)” for the BLUETOOTH connection quality. For details, refer to the operating instructions supplied with the device.
-
Select “Priority on Stable Connection (SBC)” for the BLUETOOTH connection quality of the speaker.
-
Install the latest version of “Sony | Music Center” on the connected device. If you cannot use the latest version of “Sony | Music Center” or you cannot connect the speaker and a BLUETOOTH device via BLUETOOTH connection, uninstall “Sony | Music Center” and install it again.
-
Depending on the app being used on the connected BLUETOOTH device, you may hear no sound. In such a case, close the app and start it once again. This may help for solving the issue.