If Your TV Has the S-CENTER SPEAKER IN Jack

The TV can output the center part of the speaker system sound if the speaker system is connected to the TV using the following method.

  1. Connect the speaker system and TV using the HDMI cable (supplied).
  2. Connect the S-CENTER SPEAKER IN jack on the TV and the S-CENTER OUT jack on the speaker system using the TV center speaker mode cable (supplied).

    TV center speaker mode cable (supplied)

    TV

Note

  • Check that the connectors are firmly inserted.

Hint

  • If the TV center speaker mode cable is not long enough, use a commercially available stereo mini cable.

To output sound from the TV

Access [Settings] - [Sound Settings] and enable [Acoustic Center Sync] on the remote control screen on the app.

Depending on the input, audio signal, or sound field settings, sound may not be output from the TV. For details, refer to the table below.

circle mark : Sound is output from both the speaker system and TV.

–: No sound is output from the TV. Sound is output from the speaker system only.

Setting TV, HDMI input: 2-channel content TV, HDMI input: Multi-channel content BLUETOOTH input, music service, AirPlay
[Sound field](*): On and [Sound Field Setting](**): [360 Spatial Sound Mapping] circle mark circle mark
[Sound field](*): On and [Sound Field Setting](**): [Dolby Speaker Virtualizer], [DTS Neural:X]
[Sound field](*): Off circle mark

*Displayed on the remote control screen on the app.

**Displayed by tapping [Settings] - [Sound Settings] - [Sound Field Setting] on the remote control screen on the app.

TP1001174827