Resetting the Speaker System

If the speaker system still does not operate properly with “Troubleshooting,” reset the speaker system.


Resetting the control box

Press and hold (power) on the control box for more than 10 seconds.

Resetting the speakers

Press and hold LINK on the bottom of the speaker for more than 10 seconds.

The power indicator on the speaker flashes slowly in red and the reset starts. The power indicator on the speaker flashes in green and amber alternately when the reset is completed.

After the reset is completed, disconnect the AC power cord (mains lead) for the speaker from the AC outlet (mains), then reconnect the AC power cord (mains lead) for the speaker after the power indicator on the speaker turns off.

Note

  • When the speaker system is reset, delete the pairing information for the speaker system (name of the speaker system (**), LE_name of the speaker system) from the BLUETOOTH setting on the smartphone(*), etc. connected to the speaker system.

    *Smartphones with the app installed, audio devices compatible with BLUETOOTH, etc.

    ** BRAVIA Theatre Quad or the device name that is set in [Unit Name].

  • If you reset the control box or speakers, perform the initial setup on the app.
  • When [External Control] is enabled, this reset operation alone will not delete some of the setting information. Perform the following procedure before resetting.
    Procedure: Press and hold down NIGHT (Night mode) on the supplied remote control for 5 seconds, then press (Volume) +, (Volume) , and (Muting) in this order.
TP1001054642