Specifications
Speakers (YY2080C2/YY2080C3/YY2080C4/YY2080C5)
The following descriptions are the specifications per speaker.
Front speaker section
Woofer
85 mm × 85 mm (3 3/8 in × 3 3/8 in) Cone type
Midrange speaker
60 mm (2 3/8 in) Cone type
Tweeter
19 mm (3/4 in) Soft dome type
Speaker system
3way speaker system bass reflex type
Top speaker section
Speaker
36 mm × 79 mm (1 7/16 in × 3 1/8 in) Cone type
Speaker system
Full range speaker system acoustic suspension type
General
Power consumption
On: 20 W
Network standby mode (power indicator is lit in red): 1.1 W or less
Turned off (power indicator is off): 0.5 W or less*
* When you press and hold the LINK for 2 seconds or more and then release your finger, the speaker shifts to the power off mode and the power indicator is turned off. Press the LINK to use the speaker again.
When the [Auto Standby] function is enabled, if the speaker system is not being operated and there is no signal input for about 20 minutes, the speakers automatically enter the network standby mode.
Disabling the [Auto Standby] function will increase the power consumption of this speaker system.
Dimensions* (approx.) (w/h/d)
Speaker:
289 mm × 275 mm × 55 mm (11 1/2 in × 10 7/8 in × 2 1/4 in)
Speaker with the table stand:
289 mm × 306 mm × 129 mm (11 1/2 in × 12 1/8 in × 5 1/8 in)
Speaker with the wall mounting bracket:
289 mm × 279 mm × 73 mm (11 1/2 in × 11 in × 2 7/8 in)
* Not including projection portion
Mass (approx.)
Speaker:
2.4 kg (5 lb 5 oz)
Speaker with the table stand:
2.6 kg (5 lb 12 oz)
Speaker with the wall mounting bracket:
2.7 kg (5 lb 16 oz)
Control Box (YY2080C1)
HDMI section
Connector
Type A (19pin)
LAN section
LAN(100) terminal
100BASE-TX Terminal
Wireless LAN section
Communication system
IEEE 802.11 a/b/g/n/ac
Frequency band
2.4 GHz, 5 GHz
BLUETOOTH section
Communication system
BLUETOOTH Specification version 5.2
Output
BLUETOOTH Specification Power Class 2
Maximum communication range
Line of sight approx. 30 m (98.4 ft) 1）
Maximum number of devices to be registered
9 devices: BLUETOOTH Low Energy (Connection with Sony | BRAVIA Connect)
9 devices: BLUETOOTH Classic (A2DP)
Frequency band
2.4 GHz band (2.400 0 GHz - 2.483 5 GHz)
Modulation method
FHSS (Freq Hopping Spread Spectrum)
Compatible BLUETOOTH profiles2）
A2DP (Advanced Audio Distribution Profile)
AVRCP (Audio Video Remote Control Profile)
Supported Codecs3）
SBC (Subband Codec)
AAC (Advanced Audio Coding)
LDAC™4）
Transmission range (A2DP)
20 Hz - 40 000 Hz (LDAC sampling frequency 96 kHz with 990 kbps transmission)
20 Hz - 20 000 Hz (Sampling frequency 44.1 kHz)
1） The actual range will vary depending on factors such as obstacles between devices, magnetic fields around a microwave oven, static electricity, cordless phone use, reception sensitivity, the operating system, software applications, etc.
2） BLUETOOTH standard profiles indicate the purpose of BLUETOOTH communication between devices.
3） Codec: Audio signal compression and conversion format
4） LDAC is an audio coding technology developed by Sony that enables the transmission of High-Resolution (Hi-Res) Audio content, even over a BLUETOOTH connection.
General
Input
HDMI IN*
Outputs
HDMI OUT (TV eARC/ARC)*
S-CENTER OUT
* HDMI IN and HDMI OUT (TV eARC/ARC) jacks support HDCP2.2 and HDCP2.3 protocols. HDCP2.2 and HDCP2.3 are newly enhanced copyright protection technology that is used to protect content such as 4K movies.
Power consumption
On: 13 W
Network standby mode ([Network/Bluetooth Standby] is set to ON): 2.8 W or less
Standby mode ([Network/Bluetooth Standby] is set to OFF): 0.5 W or less*
* When [Standby Through] is set to OFF, or [Standby Through] is set to [Auto] while the connected TV is turned off.
When the [Auto Standby] function is enabled, if the speaker system is not being operated and there is no signal input for about 20 minutes, the control box automatically enters the network standby mode or standby mode.
Disabling the [Auto Standby] function will increase the power consumption of this speaker system.
Dimensions* (approx.) (w/h/d)
160 mm × 56 mm × 160 mm (6 3/8 in × 2 1/4 in × 6 3/8 in)
* Not including projection portion
Mass (approx.)
770 g (1 lb 12 oz)
Wireless Transmitter/Receiver Section
Communication system
Wireless Sound Specification version 4.0
Frequency band
5 GHz
Modulation method
OFDM
Note
- Design and specifications are subject to change without notice.
- Refer to the Reference Guide included with your product, which may contain specification information not listed above.
