Connecting to a paired iPhone

  1. Unlock the screen of the iPhone if it is locked.
  2. Remove the headset units from the charging case.

    The headset turns on automatically.

  3. Put the headset units into your ears.

    When the headset has automatically connected to the last connected device, you will hear a notification sound indicating that the connection is established from both headset units at the same time. When you are wearing only one headset unit, you will hear the notification sound from the headset unit you are wearing.

    Check the connection status on the iPhone. If it is not connected, proceed to step 4.

  4. On your iPhone screen, go to [Settings] and touch [Bluetooth].

  5. Touch the switch to turn on the Bluetooth function.

  6. Touch [LinkBuds Open].

    You will hear a notification sound indicating that the connection is established from both headset units at the same time. When you are wearing only one headset unit, you will hear the notification sound from the headset unit you are wearing.

Hint

  • The operation above is an example. For more details, refer to the operating instructions supplied with the iPhone.

Note

  • When connecting, [LinkBuds Open], [LE_LinkBuds Open], or both may be displayed on the connecting device. When both or [LinkBuds Open] is displayed, select [LinkBuds Open]; when [LE_LinkBuds Open] is displayed, select [LE_LinkBuds Open].
  • If the last connected Bluetooth device is placed near the headset, the headset may automatically connect to the device when you turn on the headset and may not connect to another device.
    If this occurs, cancel the Bluetooth connection on the last connected device.
  • If you cannot connect your iPhone to the headset, delete the headset pairing information on your iPhone and perform pairing again. As for the operations on your iPhone, refer to the operating instructions supplied with the iPhone.