Using Voice Control

There are three languages that can be used: "Japanese", "English", and "Chinese”.

  1. Make the following settings with the “Sony | Sound Connect” app.
    • Set [Voice Control / Voice Assistant] to [Operate headphones with Voice Commands]
    • Set the language in [Voice Control Language Setting]
  2. Speak the wake word.

    You can use the following words as wake words:

    Japanese: ハローヘッドホン

    English: Hey, Headphones

    Chinese: Hey, 你好


    You will hear a notification sound indicating that the wake word has been accepted, and the system will wait for a voice command input for approx. 8 seconds.

  3. Enter voice commands to operate the headset while waiting for input.

    You can check available voice commands on the “Sony | Sound Connect” app.

  • You can use the Voice Assistant Function of the connected device by speaking the following words instead of the wake word.

    Japanese: アシスタント

    English: Assistant

    Chinese: 语音助手

When the command is hard to detect

  • Repeat the command clearly in a loud voice.
  • If your surroundings are noisy, your voice may not be recognized properly.
  • If the headset volume is too loud, your voice may not be recognized properly.
  • After you say “アシスタント”, “Assistant” or “语音助手”, it may take about 2 seconds for the Voice Assistant Function to start up.