Speaking with someone while wearing the headset (Speak-to-Chat)

If Speak-to-Chat is enabled in advance, the Speak-to-Chat mode starts automatically when you talk to someone.

The headset pauses or mutes the music being played.

When the headset does not detect the wearer’s voice for a certain period of time, the Speak-to-Chat mode ends automatically.

If you want to end the mode before that, tap the left or right headset unit or the area near your ear 2 or 3 times quickly (with an interval of about 0.2 seconds between taps).

To enable Speak-to-Chat

To activate the Speak-to-Chat mode, Speak-to-Chat must be enabled in advance.

In the factory settings, Speak-to-Chat is disabled. To enable, change the setting with the “Sony | Sound Connect” app.

To disable Speak-to-Chat

To disable, change the setting with the “Sony | Sound Connect” app.

About the instruction manual video

Watch the video for how to use Speak-to-Chat (audio explanation is not available).

https://rd1.sony.net/help/mdr/mov0087/h_zz/

Hint

  • The Speak-to-Chat mode also ends in the following instance.
    • When operating the connected device to play music
    • When both headset units are removed while the wearing detection automatic power off function is enabled
  • When you use the “Sony | Sound Connect” app, you can change the sensitivity of the automatic audio detection and change the time until the Speak-to-Chat mode ends, in addition to the mode to switch between enabling and disabling. In the factory settings, the time until the mode ends is set to about 15 seconds.

Note

  • The Speak-to-Chat mode activates when the headset detects the speech of the person wearing the headset, but in rare cases it may activate in response to vibrations caused by devices such as electric toothbrushes, electric massagers, and electric shavers, or by activities such as brushing your teeth, coughing, or humming. In cases where the Speak-to-Chat mode frequently activates by accident, set Speak-to-Chat to “L Sensitivity”.
  • Music playback is paused while the Speak-to-Chat mode is active only when connected via Bluetooth connection.
  • The connected device or playback application you are using may not support the pausing of music or video content playback when the Speak-to-Chat mode is activated or the resuming of music playback when the Speak-to-Chat mode is deactivated.
  • If the sound volume is loud, the headset is not worn properly, or the volume of the spoken voice is low, the speech of the person wearing the headset may not be detected, and the Speak-to-Chat mode may not activate.
    If this is the case, speech detection may be improved by speaking more slowly or in a louder voice, making sure the headset is in the correct position, turning down any music playing, or setting Speak-to-Chat to “H Sensitivity”.