Connecting to a paired iPhone

  1. Unlock the screen of the iPhone if it is locked.
  2. Remove the headset units from the charging case.

    The headset turns on automatically.

  3. Put the headset units into your ears.

    When the headset has automatically connected to the last connected device, you will hear a notification sound indicating that the connection is established from the headset units.

    Check the connection status on the iPhone. If it is not connected, proceed to step 4.

  4. On your iPhone screen, go to [Settings] and touch [Bluetooth].

  5. Touch the switch to turn on the Bluetooth function.

  6. Touch [WF-1000XM6].

    You will hear a notification sound indicating that the connection is established from the headset.

Hint

  • The above operating procedure is an example. For more details, refer to the operating instructions supplied with the iPhone.

Note

  • When connecting, [WF-1000XM6], [LE_WF-1000XM6], or both may be displayed on the connecting device. If both are displayed, select [WF-1000XM6].
  • If the last connected Bluetooth device is placed near the headset, the headset may automatically connect to the device when you turn on the headset and may not connect to another device.
    If this occurs, cancel the Bluetooth connection on the last connected device.
  • If you cannot connect your iPhone to the headset, delete the headset pairing information on your iPhone. Then, pair them again. For the operating procedures on your iPhone, refer to the operating instructions supplied with the iPhone.
TP1002088418