Settings Screen (when M2L-X is selected as the connection destination)

Tap the (Settings) icon to display the [Settings] screen.

Configure the application settings on this screen.

[Connection]

Connect to M2L-X. Enter the following items.

Note

  • It is recommended that you change the password at regular intervals for security.
  • [Host name]: Enter the host name or IP address of M2L-X.
  • [User name]: Enter your user name registered for this application in M2L-X.
  • [Password]: Enter your password registered for this application in M2L-X.
  • [Name]: Enter the name of the mobile device to display in the M2L-X user interface.
  • [ID]: Displays the ID used for M2L-X device management. A value cannot be entered. You can press and hold the ID value to generate the ID again. If regenerated, the mobile device must be registered in M2L-X again.
  • [Connect] button: Connects to M2L-X.
  • [Automatically connect if the network is disconnected or the application is started]: When turned on, automatically connect if the network is disconnected and when the application launches.

[Camera]

  • [Frame rate]: Specify the frame rate. The frame rates that can be configured vary with each mobile device.
  • [Image stabilization]: Turn image stabilization on/off. Not configurable if “Not supported” is displayed.
  • [Grid lines]: Turn the display of grid lines on/off.

[Audio]

  • [Muting]: Turn audio muting on/off.

[About]

  • [End user license agreement]: Display the End User License Agreement.
  • [License information]: Display license information.

[Help]

Display the Help (this document).

Tap the (Camera) button to return to the camera screen.

Go to Page Top