Main unit

Illustration of the wireless speaker when viewed from its front side. 11 is located in the upper right of the top surface, and when opened, there are buttons and connectors. From the left are 12 and 13. The touch keys and buttons are located below 11. The locations of the components are as follows. In the top row, from the left are 6 and 7. In the second row from the top, from the left are 4, 5, and 8. In the third row from the top, from the left are 3, 10, and 9. On the lowest row, 1 is on the left and 2 is on the right. On the top of the front surface is 14, and 15 is both on the top and bottom of the front surface. 16 is on both the left and right sides.

Illustration of the wireless speaker when viewed from its rear side. 20 is located at the top of the rear surface, and when opened, there are the port, connector and jack. From the left are 17, 18, and 19. 21 is at the bottom of the rear surface.

  1. (power) button with indicator

  2. ULT button

  3. Direct function keys

    • (BLUETOOTH) with indicator

    • OPTICAL IN

    • TV SOUND BOOSTER

    • AUDIO IN

    • USB

  4. MULTI COLOR

  5. Lighting color selectors (red/yellow/green/blue/purple)

  6. KEY CONTROL (flat) with indicator/(sharp) with indicator

  7. ECHO with indicator

  8. LIGHT

  9. –/+ (volume)

  10. (play)*

  11. Cap

  12. GUITAR button with indicator

  13. MIC and GUITAR level (MIN/MAX) knob

    MIC/GUITAR jack (Φ 6.3 mm)

  14. Handle

  15. Lights

  16. Mic holders

  17. PLAY/CHARGE OUTPUT (DC power output only) port (USB)

  18. OPTICAL IN (optical digital audio input) connector

  19. AUDIO IN jack (Φ 3.5 mm)

  20. Cap

  21. AC input jack

* Touching and holding (play) on the speaker for about 5 seconds makes the speaker play the music track stored for demonstration purposes. To disable this feature, tap (play) on the speaker once again.

Note

  • The port, connector, and jacks on the speaker are not designed for water resistant. Do not use the speaker in places where the speaker is likely to have water splashed on it. When you are finished with using the speaker, be sure to securely close the caps.