Pairing and connecting with BLUETOOTH® devices

When pairing with two or more BLUETOOTH devices, perform the following pairing procedure for each device.

Before operating the speaker, be sure to do the following:

  • Place the BLUETOOTH device within 1 m (3 ft) from the speaker.
  • Connect the speaker to an AC outlet via the AC adaptor (supplied) or charge the built-in battery sufficiently.
  • Stop playback on the BLUETOOTH device.
  • Turn down the volume of the BLUETOOTH device and the speaker to avoid any sudden loud sound output from the speaker. Depending on the paired BLUETOOTH device, the volume of the BLUETOOTH device may be synchronized with the volume of the speaker when you start playing music after a BLUETOOTH connection is established.
  1. After the Google Assistant setup is complete, press and hold the (BLUETOOTH) button/ PAIRING button until the (BLUETOOTH) indicator starts flashing quickly.

    The speaker is placed in BLUETOOTH pairing mode.

  2. Perform the pairing procedure on the BLUETOOTH device to detect the speaker.

    When a list of detected devices appears on the display of the BLUETOOTH device, select the speaker you set up for Google Assistant.

    If passkey* entry is prompted on the BLUETOOTH device, enter “0000.”

    * A passkey may also be called “Passcode,” “PIN code,” “PIN number” or “Password.”

  3. Follow the instructions on the BLUETOOTH device screen to establish a BLUETOOTH connection.

    When the BLUETOOTH connection is established, the (BLUETOOTH) indicator switches from flashing to a steady light.

Hint

  • For details on operating a BLUETOOTH device, refer to the operating instructions supplied with the BLUETOOTH device.
  • With the previously connected BLUETOOTH device, you can establish a BLUETOOTH connection simply by pressing the (BLUETOOTH) button/ PAIRING button on the speaker, provided that the BLUETOOTH function is active on the BLUETOOTH device.

Note

  • The (BLUETOOTH) button/ PAIRING button is disabled before the Google Assistant setup is complete.
  • The speaker goes out of BLUETOOTH pairing mode in about 3 minutes and the (BLUETOOTH) indicator goes out.

  • Once the speaker is paired with the BLUETOOTH device, there is no need to pair them again, except in the following cases:

    • Pairing information is deleted due to repair work, etc.

    • The pairing information of the speaker is deleted from the BLUETOOTH device.

    • The speaker is initialized.

      All pairing information will be deleted.

  • The speaker can be paired with multiple devices, but can only have a BLUETOOTH connection with one paired device at a time.
  • Video viewing using a BLUETOOTH connection is not recommended. A slight misalignment occurs in video and audio.
Go to Page Top