About the indicators

(power) indicator

Turns off The speaker is turned off.
Lights up (white) The speaker is turned on. The EXTRA BASS mode or LIVE SOUND mode is set. When you purchase, the EXTRA BASS is set.
Lights up (green) The speaker is turned on. The STANDARD mode is set. (The EXTRA BASS and LIVE SOUND modes are not set.)
Flashes (white or green) The speaker is shifting from the power-off state to the power-on state or vice versa.
Each time you press the –/+ (volume) buttons, the indicator flashes once.
When you operate the –/+ (volume) buttons and the volume is set at the lowest or highest level, the indicator flashes 3 times.
The speaker is being initialized.
Flashes (red) The speaker has an error.

CHARGE indicator (orange)

Turns off The speaker has completed charging.
Lights up The speaker is being charged.
Flashes The speaker has a charging error.
Flashes slowly The built-in battery is running at less than 10% and needs to be charged.
Flashes 3 times and turns off If the CHARGE indicator flashes 3 times and goes off when you turn on the speaker, the built-in battery is empty and needs to be charged.

Note

  • The speaker that is in use can be charged if it is connected to an AC outlet via the supplied AC adaptor or a USB AC adaptor (commercially available). In this case, it may take longer to charge the built-in battery depending on the conditions of use. Therefore, it is recommended to turn off the speaker when charging.

  • When you use the speaker at a loud volume for a long time, the built-in battery may run low even if the speaker is connected to an AC outlet. As a result, sound becomes low. This is not a malfunction. Turn off the speaker and charge the built-in battery sufficiently.

  • In an extremely cold or hot environment, charging stops for safety. If charging takes a long time, it also makes charging of the speaker stop. To resolve these issues, disconnect the supplied AC adaptor or a USB AC adaptor (commercially available) from the speaker and connect it within an operating temperature between 5 ℃ and 35 ℃ (41 °F and 95 °F). Then, charge the built-in battery again.

LINK indicator

Turns off No connection information is found.
Lights up (green) The speaker is in Wi-Fi 5 GHz: ON/2.4 GHz: ON mode.
Lights up (orange) The speaker is in Wi-Fi 5 GHz: OFF/2.4 GHz: ON mode.
Flashes (green) The speaker is switching from Wi-Fi 5 GHz: OFF mode to Wi-Fi 5 GHz: ON mode.
Flashes (orange) The speaker is switching from Wi-Fi 5 GHz: ON mode to Wi-Fi 5 GHz: OFF mode.
Flashes 3 times (white) The software has completed updating.

(BLUETOOTH) indicator

Lights up The speaker is connected to a BLUETOOTH device.
Flashes quickly (3 times a second) The speaker enters the pairing mode.
Flashes The speaker is attempting to detect NFC signals.

LIVE indicator

Lights up The LIVE SOUND mode is set.
Turns off The EXTRA BASS or STANDARD mode is set. (The LIVE SOUND mode is not set.)

Status indicators (Google Assistant)

Flash (blue or white) When two of the four indicators flash in blue or all four indicators flash in white, the speaker is preparing for initialization.
Flash (purple or white) When each one of the four indicators flashes subsequently from left to right, the speaker is downloading the latest software. When the download is complete (all four indicators light up), the speaker restarts and software installation starts.
Flash (blue)

When each one of the four indicators flashes subsequently from left to right, the speaker is installing the software.

When the installation is complete, all four indicators light up.

All light up (white) The speaker is attempting to detect the voice command.
All light up (orange)

The built-in microphone is turned off.
To turn it on, press the(microphone off) button.

All light up (green) The speaker is being initialized.

Hint

  • The colors of the indicators may vary depending on the software version of the speaker.

  • Design and specifications are subject to change without notice.