Shooting movies

You can record movies by pressing the MOVIE (Movie) button.

  1. Press the MOVIE button to start recording.

    • Since the [MOVIE Button] is set to [Always] in the default setting, movie recording can be started from any shooting mode.

  2. Press the MOVIE button again to stop recording.

Hint

  • You can assign the start/stop movie recording function to a preferred key. MENU → (Camera Settings2) → [Custom Key] → set [MOVIE] to the preferred key.
  • When you want to specify the area to be focused on, set the area using [Focus Area].
  • To keep the focus on a face, arrange the composition so that the focusing frame and face detection frame overlap, or set the [Focus Area] to [Wide].
  • To adjust the shutter speed and aperture value to the desired settings, set the shooting mode to (Movie) and select the desired exposure mode.
  • An icon indicating that data is being written is displayed after shooting. Do not remove the memory card while the icon is displayed.
  • The following settings for still image shooting are applied to the movie shooting:
    • White Balance
    • Creative Style
    • Metering Mode
    • Face Priority in AF
    • Face Prty in Mlti Mtr
    • D-Range Opt.
  • You can change the settings for ISO sensitivity, exposure compensation, and focus area while shooting movies.
  • While shooting movies, the recorded image can be output without the shooting information display by setting [HDMI Info. Display] to [Off].

Note

  • You cannot record still images during movie recording.
  • The sound of the lens and the product in operation may be recorded during movie recording. The sound of the zoom is particularly likely to be recorded during movie recording if [Zoom Speed] is set to [Fast] or [Zoom Func. on Ring] is set to [Quick].
    You can turn the sound off by selecting MENU → (Camera Settings2) → [Audio Recording] → [Off].
  • The temperature of the camera tends to rise when shooting movies continuously, and you may feel that the camera is warm. This is not a malfunction. Also, [Internal temp. high. Allow it to cool.] may appear. In such cases, turn the power off and cool the camera and wait until the camera is ready to shoot again.
  • If the icon appears, the temperature of the camera has risen. Turn the power off and cool the camera and wait until the camera is ready to shoot again.
  • For the continuous shooting time of a movie recording, refer to “Recordable movie times.” When movie recording is finished, you can record another movie by pressing the MOVIE button again. Recording may stop to protect the product, depending on the temperature of the product or the battery.
  • In [Program Auto] mode when shooting movies, the aperture value and the shutter speed will be set automatically and cannot be changed. For that reason, the shutter speed may become fast in a bright environment, and the motion of the subject may not be recorded smoothly. By changing the exposure mode and adjusting the aperture value and the shutter speed, the motion of the subject can be recorded smoothly.
  • When ISO sensitivity is set to [Multi Frame NR], [ISO AUTO] will be set temporarily.
  • In movie shooting mode, the following settings cannot be set in [Picture Effect]. When a movie recording starts, [Off] will be set temporarily.
    • Soft Focus
    • HDR Painting
    • Rich-tone Mono.
    • Miniature
    • Watercolor
    • Illustration
  • If you point the camera at an extremely strong light source while shooting a movie at low ISO sensitivity, the highlighted area in the image may be recorded as a black area.
  • If the display mode of the monitor is set to [For viewfinder], the display mode will switch to [Display All Info.] when movie shooting starts.
  • Use PlayMemories Home when importing XAVC S movies and AVCHD movies to a computer.
Go to Page Top