Auto Pwr OFF Temp.
Sets the temperature of the camera at which the camera turns off automatically during shooting. When it is set to [High], you can continue shooting even when the temperature of the camera gets hotter than normal.
-
MENU → (Setup) → [Auto Pwr OFF Temp.] → desired setting.
Menu item details
- Standard:
- Sets the standard temperature at which the camera turns off.
- High:
- Sets a higher temperature than the standard at which the camera turns off.
Notes when [Auto Pwr OFF Temp.] is set to [High]
- Do not shoot while holding the camera in your hand. Use a tripod.
- Using the camera while holding it in your hand for a long period of time may cause low-temperature burns.
Continuous recording time for movies when [Auto Pwr OFF Temp.] is set to [High]
The duration of time available for continuous movie recording is as follows when the camera starts recording with the default settings after the power has been turned off for a while. The following values indicate the continuous time from when the camera starts recording until the camera stops recording.
- Ambient temperature: 20°C (68°F)
- Continuous recording time for movies (HD): Approx. 29 minutes
- Continuous recording time for movies (4K): Approx. 5 minutes
- Ambient temperature: 30°C (86°F)
- Continuous recording time for movies (HD): Approx. 29 minutes
- Continuous recording time for movies (4K): Approx. 5 minutes
- Ambient temperature: 40°C (104°F)
- Continuous recording time for movies (HD): Approx. 15 minutes
- Continuous recording time for movies (4K): Approx. 5 minutes
HD: XAVC S HD (60p 50M/50p 50M, not connected via Wi-Fi)
4K: XAVC S 4K (30p 60M/25p 60M, not connected via Wi-Fi)
Note
- Even if [Auto Pwr OFF Temp.] is set to [High], depending on the conditions or the temperature of the camera, the recordable time for movies may not change.
- Continuous movie shooting is possible for a maximum of approximately 29 minutes at a time. The recording time is approximately 5 minutes when shooting movies in XAVC S 4K/XAVC S HD 120p/100p format. (a product specification limit)