Turning on the headset

When the headset is set into the charging case

  1. Remove the headset from the charging case.

    The headset turns on automatically and the indicators (blue) flash.
    When you remove only one unit from the charging case, only the removed unit turns on.

    When you put the headset on your ears, you will hear the voice guidance say “Power on”.

When the headset is not set into the charging case

When the headset is not worn on your ears for about 5 minutes after being removed from the charging case, the headset turns off automatically. In this case, turn the headset on by tapping the touch sensor of the headset or by putting the headset on your ears. The headset will also turn on when it is set into the charging case and then removed from the charging case.

By using the “Sony | Headphones Connect” app, you can change the setting of the headset so that it will not be turned off automatically.

When the headset is turned on

The noise canceling function is turned on automatically. When both units are removed from the charging case, the connection between the left and right units of the headset is established.
The headset goes into Bluetooth pairing mode when turning on the headset for the first time after purchase or just after initializing the headset.