Displaying the Video from a User Device on the Main Unit or Pod (Mirroring)

You can use the video displayed on a user device in a discussion or presentation by mirroring the display on the main unit or a Pod.

If audio is played back on a Windows user device, the same audio is also output from the main unit or Pod.

Up to six user devices can be mirrored to a main unit or a Pod at the same time.

Mirroring is performed from Vision Exchange App.

Note

  • When mirroring from multiple user devices, the audio from all user devices is combined and output from the main unit or Pod. To output audio from a single user device, stop the audio output from all the other user devices.
  • For macOS and Android user devices, audio is not output from the main unit or Pod when playing audio on the user device.
  • The connection may be disconnected automatically after mirroring for an extended time or other reasons, depending on the network environment. In this case, temporarily exit mirroring and then reconnect.
  • The content cannot be displayed correctly if the screen resolution is changed during mirroring. In this case, temporarily exit mirroring and then reconnect.
  • If the Windows PC is locked during mirroring using Vision Exchange App, the image may not be displayed correctly. In this case, temporarily exit mirroring and then reconnect.
  • Application mirroring is supported in iOS.
  1. Log in to the main unit or Pod from Vision Exchange App, and press [Mirroring] on the [Home] screen.
  2. Set the switch to [On].

    The video of the user device is mirrored on the main unit or Pod to which you are logged in.

    You can select whether the mirrored video is shown in the content area or in full-screen mode by pressing [Content area] or [Full screen] in Vision Exchange App.

    If multiple displays are connected, [Content area] and [Full screen] are each displayed in two locations.

    In this case, press [Content area] or [Full screen] on the display that you want to show the mirrored video.

If mirroring does not operate correctly

  • Mirrored video in Vision Exchange App is encoded using hardware acceleration. If hardware acceleration is not supported by the operating environment, it is automatically disabled.
    If the mirroring function does not operate correctly, physically disable hardware acceleration using the following procedure.
    On the [Login] screen of Vision Exchange App, press to display the [Setting] screen, move the [Enable hardware acceleration for video encoding] switch to the [Off] position.
  • Some video content may be displayed intermittently when mirroring, depending on the operating environment. In this case, update the graphics driver of the user device and run Windows Update.

To exit mirroring

Set the switch to [Off] on the [Mirroring] screen of Vision Exchange App.

Go to Page Top