Pairing and connecting with a BLUETOOTH device

The bulb speaker can be paired with up to seven BLUETOOTH devices.

When pairing with two or more BLUETOOTH devices, perform the following pairing procedure for each device.

Before operating the bulb speaker, be sure to do the following: 

  • Make sure that the battery in the remote control has power remaining.
  • Stop playback on a BLUETOOTH device to avoid sudden loud sound output from the bulb speaker.
  • Prepare the operating instructions supplied with the BLUETOOTH device for reference.
  1. Turn on the light fixture to which the bulb speaker is installed.

    The bulb speaker turns on.

  2. Press and hold the (play/pause)/ PAIRING button.

    The bulb speaker will make a sound* to indicate that pairing mode has been entered. Release the button when the sound is made.

    • When the BLUETOOTH device that was most recently connected is nearby, simply press the (play/pause)/ PAIRING button, and the bulb speaker will automatically connect with the device that was previously connected. If you want to connect with a different device, end the current connection by operating the connected BLUETOOTH device.
  3. Perform the pairing procedure on the BLUETOOTH device to detect the bulb speaker.

    When a list of detected devices appears on the display of the BLUETOOTH device, select “LSPX-102E26.”

    If a passkey* is required on the display of the BLUETOOTH device, enter “0000.”

    * A passkey may be called “Passcode,” “PIN code,” “PIN number” or “Password.”

  4. Make the BLUETOOTH connection from the BLUETOOTH device.

    When pairing is complete, the bulb speaker will make a sound* to indicate that a BLUETOOTH connection has been established.

    If the BLUETOOTH connection is not established, repeat from step .

Hint

  • For details on operating a BLUETOOTH device, refer to the operating instructions supplied with the BLUETOOTH device.

Note

  • The pairing mode of the bulb speaker is released after about five minutes. If the pairing mode is released before finishing the process, repeat from step .
  • Once the BLUETOOTH devices are paired, there is no need to pair them again, except in the following cases:
    • Pairing information has been deleted after repair, etc.
    • The bulb speaker is already paired with seven devices and another device is to be paired.

      The bulb speaker can be paired with up to seven devices. If a new device is paired after seven devices have already been paired, the paired device with the oldest connection time is replaced by the new one.

    • When the pairing information of the bulb speaker has been deleted from the BLUETOOTH device.
    • When the bulb speaker is initialized, all the pairing information is deleted.
Go to Page Top