Setting up the Speaker Add function
To set up the Speaker Add function, you first need to set up the bulb speaker that you want for the left channel (left side) as the master unit, and then connect the two bulb speakers to each other. Lastly, pair and connect the master unit with a BLUETOOTH device.
- Set up the master unit.Confirm the following points before performing this operation.
- If you have already set up the master unit, proceed directly to step
"Connect the two bulb speakers." Be aware that if you perform step 
when the master unit is already set, the master unit setting will be canceled. - The bulb speaker that is set up as the master unit plays the sound on the left channel (left side) when in stereo mode. Therefore, decide which bulb speaker you want to set up as the left side, and make that the bulb speaker.
- Only set up one bulb speaker as the master unit. If you set up two or more bulb speakers as the master unit, the Speaker Add function will not work.
- Make sure that the light fixture containing the bulb speaker that you want to set as the right channel (right side) remains turned off. If two bulb speakers turn on when a light fixture is in use, remove the bulb speaker that you want to set as the right side.
- Turn on the light fixture to which the bulb speaker that you want to set as the left side is installed.
The bulb speaker lights up.
- Aim the remote control toward the bulb speaker on the left side, then hold down the
(play/pause)/
PAIRING button for about one second after pressing and holding the STEREO/DOUBLE (switch mode)/SHIFT (shift) button.
The master unit setting is complete.
- If you have already set up the master unit, proceed directly to step
- Connect the two bulb speakers.If you removed the bulb speaker on the right side when performing step, reinstall the bulb speaker.
- With the bulb speaker on the left side (master unit) already lit, turn on the light fixture to which the bulb speaker on the right side is installed.
The bulb speaker lights up.
- Aim the remote control toward the bulb speakers, then hold down the Volume + button for about one second after pressing and holding the STEREO/DOUBLE (switch mode)/SHIFT (shift) button.
The bulb speaker on the left side will emit a series of short beeps, while the speaker on the right will emit a series of long beeps.
If there is distance between the bulb speakers, you can perform step 2 for one speaker at a time.
The Speaker Add function cannot be set for several seconds after the light fixture is turned on. Please wait a moment before performing step 2.
- With the bulb speaker on the left side (master unit) already lit, turn on the light fixture to which the bulb speaker on the right side is installed.
- Connect the speaker on the left side (master unit) with a BLUETOOTH device, and start playback in stereo mode/double mode.
- With both bulb speakers lit up, pair your BLUETOOTH device with the bulb speaker on the left side (master unit).
If the BLUETOOTH device has already been paired with the bulb speaker, just make a connection.
- Play music.
The first time you use the Speaker Add function after purchase, playback will be in stereo mode.
- With both bulb speakers lit up, pair your BLUETOOTH device with the bulb speaker on the left side (master unit).
Note
- The remote control for the bulb speaker on the right side cannot be used to adjust the volume, brightness, or color. Use the remote control for the bulb speaker on the left side to operate. The two bulb speakers will synchronize. If you want to use the bulb speaker on the right side independently, cancel the Speaker Add function.
