Specifications
Optical System
Projection System
3 LCD system
Display Device
Effective Display Size
VPL-CWZ10: 0.64 in (16.3 mm) × 3, 16:10 Aspect Ratio
VPL-CXZ10: 0.63 in (16.0 mm) × 3, 4:3 Aspect Ratio
Effective Pixels
VPL-CWZ10: 3,072,000 pixels (1,280 × 800 pixels × 3)
VPL-CXZ10: 2,359,296 pixels (1,024 × 768 pixels × 3)
Projection Lens
Focus Adjustment
Manual
Zoom Adjustment
Manual (1.6×)
Light Source
Laser diode
Projection Image Size
40 in - 300 in (1.02 m - 7.62 m)
Effective Light Flux (Brightness)
5,000 lm ([Light Output Mode]: [Standard])
Electric System
Speaker
16 W × 1 (Monaural)
Supported Scan Frequency*1
Horizontal: 15 kHz - 92 kHz, Vertical: 48 Hz - 92 Hz
Displayable Resolution*1
For Computer Signal Input
Maximum Display Resolution: 1,920 × 1,200 pixels
For Video Signal Input
NTSC, PAL, SECAM, 480/60i, 576/50i, 480/60p, 576/50p, 720/60p, 720/50p, 1080/60i, 1080/50i, 1080/60p, 1080/50p, 1080/24p
Color System
NTSC3.58, PAL, SECAM, NTSC4.43, PAL-M, PAL-N, PAL60
*1For details, refer to the supported signal table.
Input/Output Terminals
For Computer/Video Input and Output
Input A
RGB/Y PB PR Input Terminal: Mini D-sub 15 pin (Female), G with sync/Y: 1 Vp-p±2 dB, sync negative, 75 Ω terminated, RGB signal/PB PR signal: 0.7 Vp-p±2 dB, 75 Ω terminated, Sync signal: TTL level, high impedance, positive-negative polarity
Audio Input Terminal: Stereo mini jack, Rated input: 500 mVrms, Input impedance: 47 kΩ or above
Input B/Input C
HDMI Input Terminal: 19-pin HDMI, HDCP
Audio Input Terminal: HDMI audio supported
Video Input
Video Input Terminal: Phono jack, 1 Vp-p±2 dB, sync negative, 75 Ω terminated
Audio Input Terminal: Shared with Input A
Output
Audio Output Terminal: Stereo mini jack, Stereo, 1 Vrms (maximum volume, when inputting 500 mVrms), Output impedance: 5 kΩ
Other Terminals
RS-232C Terminal: D-Sub 9 pin (Male)
LAN Terminal: RJ45, 10BASE-T/100BASE-TX
USB Terminal: Type A
Power Supply/Other
Operating Temperature (Operating Humidity)
0 °C to 40 °C (32 °F to 104 °F) (20% - 80% (No condensation))
Storage Temperature (Storage Humidity)
−10 °C to +60 °C (14 °F to 140 °F) (20% - 80% (No condensation))
Power Requirements
VPL-CWZ10: 100 V to 240 V AC, 3.4 A – 1.5 A, 50/60 Hz
VPL-CXZ10: 100 V to 240 V AC, 3.4 A – 1.5 A, 50/60 Hz
Power Consumption
AC 100 V to 120 V
VPL-CWZ10: 342 W
VPL-CXZ10: 342 W
AC 220 V to 240 V
VPL-CWZ10: 326 W
VPL-CXZ10: 326 W
Standby Power Consumption (Standby Mode)
AC 100 V to 120 V
0.5 W (When setting [Standby Mode] to [Low])
AC 220 V to 240 V
0.5 W (When setting [Standby Mode] to [Low])
Standby Power Consumption (Network Standby Mode)
AC 100 V to 120 V
2.0 W (When setting [Standby Mode] to [Low] and [Remote Start] to [On])
15.0 W (If all network ports are connected) (When setting [Standby Mode] to [Standard])
AC 220 V to 240 V
2.0 W (When setting [Standby Mode] to [Low] and [Remote Start] to [On])
15.0 W (If all network ports are connected) (When setting [Standby Mode] to [Standard])
Heat Dissipation
AC 100 V to 120 V
VPL-CWZ10: 1,167 BTU/h
VPL-CXZ10: 1,167 BTU/h
AC 220 V to 240 V
VPL-CWZ10: 1,112 BTU/h
VPL-CXZ10: 1,112 BTU/h
Standard Dimensions (W/H/D)
Approx. 371 mm × 117 mm × 319.3 mm (14 19/32 in × 4 19/32 in × 12 9/16 in)
Approx. 371 mm × 100 mm × 319.3 mm (14 19/32 in × 3 15/16 in × 12 9/16 in) (Without projecting parts)
Mass
Approx. 5.7 kg (13 lb)
Supplied Accessories
Remote Commander (RM-PJ8) (1)
Lithium battery (CR2025) (1)
AC power cord (1)
Mini D-sub 15-pin cable (1.8 m) (1) (1-970-584-11/Sony)
Extension studs (4)
Air filter cover (1)*1
Dust cover assembly (1)*1
Setup Guide (1)
*1 For the customers in India only
Design and specifications of the unit, including the optional accessories, are subject to change without notice.
