Receiving a call

You can enjoy a hands-free call with a smartphone or mobile phone that supports the Bluetooth profile HFP (Hands-free Profile) or HSP (Headset Profile), via Bluetooth connection.

  • If your smartphone or mobile phone supports both HFP and HSP, set it to HFP.
  • The operation may vary depending on the smartphone or mobile phone. Refer to the operating instructions supplied with the smartphone or mobile phone.
  • Depending on the connected device or the application you are using, the functions may not work properly even if you try to operate them with the headset.

Ring tone

INZONE H9:

When an incoming call arrives, a ring tone will be heard from the headset, and the left and right ring indicators (blue) flash quickly.


INZONE H7:

When an incoming call arrives, a ring tone will be heard from the headset, and the (Bluetooth) indicator (blue) flashes quickly.


Depending on the connected device or the application you are using, the indicator(s) may not flash when an incoming call arrives.

You will hear either of following ring tones, depending on your smartphone or mobile phone.

  • Ring tone set on the headset
  • Ring tone set on the smartphone or mobile phone
  • Ring tone only for a Bluetooth connection set on the smartphone or mobile phone
  1. Connect the headset to a smartphone or mobile phone via Bluetooth connection beforehand.
  2. When you hear the ring tone, press the (Bluetooth) button on the headset and receive the call.

    When you receive an incoming call during music playback, playback pauses and a ring tone will be heard from the headset.


    INZONE H9:


    INZONE H7:


    You can talk using the boom microphone of the headset.


    INZONE H9:

    Illustration indicating the location of the boom microphone (A) on the left unit


    INZONE H7:

    Illustration indicating the location of the boom microphone (A) on the left unit

    A: Boom microphone

    If no ring tone is heard via the headset

    • The headset may not be connected with the smartphone or mobile phone over HFP or HSP. Check the connection status on the smartphone or mobile phone.
    • Check the volume of the headset.
    • If music playback does not pause automatically, operate the headset to pause playback.
  3. Adjust the volume using the VOL (volume) –/+ dial of the headset.

    There is a tactile dot on the + side.


    INZONE H9:

    Illustration indicating the location of the tactile dot (B) on the volume dial


    INZONE H7:

    Illustration indicating the location of the tactile dot (B) on the volume dial


    B: Tactile dot

    • Increase the volume: Turn to the + side.


      INZONE H9:


      INZONE H7:

    • Decrease the volume: Turn to the – side.


      INZONE H9:


      INZONE H7:

    When the volume reaches the maximum or minimum, you will hear a notification sound.

  4. When you finish your phone call, press the (Bluetooth) button on the headset to end the call.

    If you received a call during music playback, music playback resumes automatically after ending the call.

Hint

  • Adjust the volume with the connected device and headset.

Note

  • Depending on the connected device or playback application you are using, when you receive an incoming call during music playback, playback may not resume automatically even after you finish the call.
  • Use a smartphone or mobile phone at least 50 cm (19.69 in.) away from the headset. Noise may result if the smartphone or mobile phone is too close to the headset.
  • Your voice will be heard from the headset through the headset’s boom microphone (Sidetone function). In this case, ambient sounds or the sounds of the headset operation may be heard through the headset, but this is not a malfunction.
Go to Page Top