Specifications

Optical System

Projection System

3 LCD system

Display Device

Effective Display Size

0.64 in (16.3 mm) × 3, 16:10 Aspect Ratio

Effective Pixels

6,912,000 pixels (1,920 × 1,200 pixels × 3)

Projection Lens

Focus Adjustment

Manual

Zoom Adjustment

Manual (1.6×)

Light Source

Laser diode

Projection Image Size

40 in - 300 in (1.02 m - 7.62 m)

Effective Light Flux (Brightness)

VPL-PHZ61: 6,400 lm ([Light Output Mode]: [Standard])

VPL-PHZ51: 5,300 lm ([Light Output Mode]: [Standard])

Electric System

Speaker

16 W × 1 (Monaural)

Supported Scan Frequency*1

Horizontal: 15 kHz - 92 kHz, Vertical: 24 Hz - 92 Hz

Displayable Resolution*1

For Computer Signal Input

Maximum Display Resolution: 1,920 × 1,200 pixels

For Video Signal Input

NTSC, PAL, SECAM, 480/60i, 576/50i, 480/60p, 576/50p, 720/60p, 720/50p, 1080/60i, 1080/50i, 1080/60p, 1080/50p, 1080/24p, 2160/60p*2, 2160/50p*2, 2160/30p*2, 2160/25p*2, 2160/24p*2

Color System

NTSC3.58, PAL, SECAM, NTSC4.43, PAL-M, PAL-N, PAL60

*1For details, refer to the supported signal table.

*2Displayed only when the number of horizontal pixels is 3,840/4,096.

Input/Output Terminals

For Computer/Video Input and Output

Input A

RGB/Y PB PR Input Terminal: Mini D-sub 15 pin (Female), G with sync/Y: 1 Vp-p±2 dB, sync negative, 75 Ω terminated, RGB signal/PB PR signal: 0.7 Vp-p±2 dB, 75 Ω terminated, Sync signal: TTL level, high impedance, positive-negative polarity

Audio Input Terminal: Stereo mini jack, Rated input: 500 mVrms, Input impedance: 47 kΩ or above

Input B/Input C

HDMI Input Terminal: 19-pin HDMI, HDCP

Audio Input Terminal: HDMI audio supported

Input D

HDBaseT Input Terminal: RJ45, digital RGB/Y PB PR, HDCP supported, RS-232C, Ethernet (100Base-TX) transmission supported

Video Input

Video Input Terminal: Phono jack, 1 Vp-p±2 dB, sync negative, 75 Ω terminated

Audio Input Terminal: Shared with Input A

Output

Audio Output Terminal: Stereo mini jack, Stereo, 1 Vrms (maximum volume, when inputting 500 mVrms), Output impedance: 5 kΩ

Other Terminals

RS-232C Terminal: D-Sub 9 pin (Male)

LAN Terminal: RJ45, 10BASE-T/100BASE-TX

USB Terminal: Type A

USB Power Supply Terminal: Type A

Power Supply/Other

Operating Temperature (Operating Humidity)

0 °C to 40 °C (32 °F to 104 °F) (20% - 80% (No condensation))

Storage Temperature (Storage Humidity)

−10 °C to +60 °C (14 °F to 140 °F) (20% - 80% (No condensation))

Power Requirements

100 V to 240 V AC, 4.7 A – 2.0 A, 50/60 Hz

Power Consumption

AC 100 V to 120 V: 463 W

AC 220 V to 240 V: 434 W

Standby Power Consumption (Standby Mode)

0.5 W (When setting [Standby Mode] to [Low] and [Remote Start] to [Off])

Standby Power Consumption (Network Standby Mode)

1.0 W (When setting [Standby Mode] to [Low] and [Remote Start] to [On])

21.0 W (If all network ports are connected) (When setting [Standby Mode] to [Standard])

Heat Dissipation

AC 100 V to 120 V: 1,580 BTU/h

AC 220 V to 240 V: 1,481 BTU/h

Standard Dimensions (W/H/D)

422 mm × 129 mm × 338 mm (16 5/8 in × 5 3/32 in × 13 5/16 in)

422 mm × 100 mm × 333 mm (16 5/8 in × 3 15/16 in × 13 1/8 in) (Without projecting parts)

Mass

VPL-PHZ61: Approx. 7.0 kg (15 lb)

VPL-PHZ51: Approx. 6.8 kg (15 lb)

Supplied Accessories

Remote Commander (RM-PJ8) (1)

Lithium battery (CR2025) (1)

AC power cord (1)

Light shield (1)

Setup Guide (1)


Design and specifications of the unit, including the optional accessories, are subject to change without notice.