On Installation
- When installing the projector, leave space between any walls, etc. and the unit as illustrated.
Top view
A: More than 50 cm (19 11/16 inches)
B: More than 50 cm (19 11/16 inches)
C: More than 50 cm (19 11/16 inches) - Avoid using the projector if it is tilted more than 15 degrees horizontally.
- Avoid using the projector in a location where the temperature or humidity is very high, or temperature is very low.
- Avoid installing the projector in a location subject to direct cool or warm air from an air-conditioner. Installing in such a location may cause malfunction of the projector due to moisture condensation or rise in temperature.
- Avoid installing the projector in a location near a heat or smoke sensor. Installing in such a location may cause malfunction of the sensor.
- Avoid installing the projector in a very dusty or extremely smoky environment. Otherwise, the air filter will become obstructed, and this may cause a malfunction of the projector or damage it.
- When using the unit in a location at an altitude of 1,000 m (approx. 3,280 ft) or higher, appropriately set [High Altitude Mode] in
[Installation] menu. Failing to do so could have adverse effects, such as reducing the reliability of certain components. - Avoid installing the product in a space where space disinfectant components containing hypochlorous acid and chlorine dioxide are dispersed. Also, avoid spraying sanitizers or disinfectants near the product. This may cause discoloration of the product, deterioration of the material, failure due to corrosion, and easy clogging of the air filter.
