Setting up a wireless LAN: WPS Push

If your access point has a Wi-Fi Protected SetupTM (WPS) button, you can register the access point to the camera easily.

  1. MENU → (Network) → [Wi-Fi Settings] → [WPS Push].
  2. Push the Wi-Fi Protected Setup (WPS) button on the access point to connect.

Note

  • [WPS Push] works only if the security setting of your access point is set to WPA or WPA2 and your access point supports the Wi-Fi Protected Setup (WPS) button method. If the security setting is set to WEP or your access point does not support the Wi-Fi Protected Setup (WPS) button method, perform [Access Point Set.].
  • For details about the available functions and settings of your access point, see the access point operating instructions or contact the administrator of the access point.
  • A connection may not be possible or the communication distance may be shorter depending on the surrounding conditions, such as the type of wall material and the presence of obstructions or radio waves between the camera and access point.
    In this case, change the location of the camera or move the camera closer to the access point.
Go to Page Top