Security(IPsec)
Encrypts data when the camera and a computer communicate via a wired LAN (only on models supporting wired LAN) or Wi-Fi connection.
This function is not available for some versions of the camera's system software. Update the camera's system software to the latest version before use.
This function is not available for some versions of the camera's system software. Update the camera's system software to the latest version before use.
-
MENU →
(Network) → [Security(IPsec)] → desired setting.
Menu item details
- IPsec([On]/[Off]):
- Sets whether or not the [Security(IPsec)] function is used.
- Dest. IP Address:
- Sets the IP address of the device to connect using the [Security(IPsec)] function.
- Shared Key:
- Sets the shared key used by the [Security(IPsec)] function.
Note
- Use at least eight and no more than 20 alphanumeric characters or symbols for [Shared Key].
- For IPsec communications, the device to connect must be compatible with IPsec.
Depending on the device, communications may not be possible or the communication speed may be slow. - On this camera, IPsec operates in transport mode only and uses IKEv2.
The algorithm is AES with 128-bit keys in CBC mode/Diffie-Hellman 3072-bit modp group/PRF-HMAC-SHA-256/HMAC-SHA-384-192.
The authentication expires after 24 hours. - Encrypted communications can only be made with devices that are configured correctly. Communications with other devices are not encrypted.
- For details on the IPsec configuration, consult the administrator of the network for your device.
