Connecting to a paired computer (Windows 10)

Before starting the operating procedure, check the following.

  • Depending on the computer you are using, the built-in Bluetooth adaptor may need to be turned on. In the following cases, refer to the operating instructions supplied with your computer.
    • You do not know how to turn on the Bluetooth adaptor.
    • You want to know if your computer has a built-in Bluetooth adaptor.
  1. Wake the computer up if the computer is in standby (sleep) or hibernation mode.
  2. Remove the headset units from the charging case.

    The headset turns on automatically.

  3. Put the headset units into your ears.

    When the headset has automatically connected to the last connected device, you will hear a notification sound indicating that the connection is established from both headset units at the same time. When you are wearing only one headset unit, you will hear the notification sound from the headset unit you are wearing.

    Check the connection status on the computer. If it is not connected, proceed to step 4.

  4. On your computer screen, right-click the speaker icon on the toolbar, then select [Open Sound settings].

  5. Select [Headphones (WF-C710N Stereo)] from the [Choose your output device] drop-down menu.

    If [Headphones (WF-C710N Stereo)] is not displayed on the drop-down menu, proceed to step 6.

  6. Click [Sound Control Panel] and right-click on the [Playback] tab of [Sound]. Check the [Show Disconnected Devices] checkbox.

  7. Select [Connect] from the displayed menu.

    You will hear a notification sound indicating that the connection is established from both headset units at the same time. When you are wearing only one headset unit, you will hear the notification sound from the headset unit you are wearing.

Hint

  • The above operating procedure is an example. For more details, refer to the operating instructions supplied with the computer.

Note

  • If the music playback sound quality is poor, check that the A2DP function which supports music playback connections is enabled in the computer settings. For more details, refer to the operating instructions supplied with the computer.
  • If the last-connected Bluetooth device is placed near the headset, the headset may connect automatically to the device by simply turning on the headset. If this is the case, deactivate the Bluetooth function on the last-connected device or turn off the power.
  • If you cannot connect your computer to the headset, delete the headset pairing information on your computer. Then, pair them again. For the operating procedures on your computer, refer to the operating instructions supplied with the computer.