Pairing and connecting with a Bluetooth device

The operating procedure to register the device that you wish to connect to is called “pairing”. First, pair a device to use it with the headset for the first time.

Before starting the operating procedure, check the following.

  • The Bluetooth device is placed within 1 m (3.2 ft) of the headset.
  • The headset is charged sufficiently.
  • The operating instructions for the Bluetooth device are in hand.
  1. Check the status of the headset.

    The headset enters pairing mode automatically in the following cases. Proceed to step 2.

    • When you pair the headset with a device for the first time after purchasing the headset
    • After initializing the headset and clearing all pairing information

    When you pair a second or subsequent device, if the headset already has pairing information for other devices, enter pairing mode manually. Press and hold the Bluetooth button (A) for about 5 seconds or more.

    Illustration indicating the location of A

    The indicator repeatedly flashes in blue twice in a row. You will hear the voice guidance say, “Pairing”.

  2. Perform the pairing procedure on the Bluetooth device to search for this headset.

    [1000X THE COLLEXION] will be displayed on the list of detected devices on the screen of the Bluetooth device.

    If it is not displayed, repeat from step 1.

  3. Select [1000X THE COLLEXION] displayed on the screen of the Bluetooth device for pairing.

    If Passkey (*) input is required, input “0000”.

    (*) A Passkey may be called “Passcode”, “PIN code”, “PIN number”, or “Password”.

  4. Make the Bluetooth connection from the Bluetooth device.

    Some devices automatically connect with the headset when pairing is complete.

    You will hear a notification sound indicating that the connection is established.

    If they are not connected, see “Connecting to a paired Bluetooth device”.

Hint

Note

  • If pairing is not established within 5 minutes, pairing mode is canceled. In this case, turn off the power and start the operating procedure again from step 1.
  • Once Bluetooth devices are paired, there is no need to pair them again, except in the following cases:
    • If pairing information is deleted, such as after a repair
    • When a 9th device is paired
      The headset can be paired with up to 8 devices. If you pair a 9th device, the pairing information with the oldest connection date and time will be overwritten with the information for the new device.
    • When the pairing information for the headset has been deleted from the connected Bluetooth device
    • When the headset is initialized
      All of the pairing information will be deleted. In this case, delete the pairing information for the headset from the connected device and then pair them again.
  • The headset can be paired with multiple devices, but can only play music from 1 paired device at a time.
TP1002085444