Connecting to a paired Bluetooth device
-
Turn on the headset.
Press and hold the power button (A) for about 2 seconds or more.
You will hear a notification sound indicating that the headset is turned on.
The indicator continues to flash in blue even after you release your finger from the button.
If the headset has automatically connected to the last connected device, you will hear a notification sound indicating that the connection is established.
Check the connection status on the Bluetooth device. If it is not connected, proceed to step 2.
-
Make the Bluetooth connection from the Bluetooth device.
For the operating procedures on your Bluetooth device, refer to the operating instructions supplied with the Bluetooth device.
When connected, you will hear a notification sound indicating that the connection is established.
Hint
- The above operating procedure is an example. For more details, refer to the operating instructions supplied with the Bluetooth device.
Note
- When connecting, [1000X THE COLLEXION], [LE_1000X THE COLLEXION], or both may be displayed on the connecting device. If both are displayed, select [1000X THE COLLEXION].
- If the last-connected Bluetooth device is placed near the headset, the headset may connect automatically to the device by simply turning on the headset. If this is the case, deactivate the Bluetooth function on the last-connected device or turn off the power.
- If you cannot connect your Bluetooth device to the headset, delete the headset pairing information on your Bluetooth device. Then, pair them again. For the operating procedures on your Bluetooth device, refer to the operating instructions supplied with the Bluetooth device.