Listening to music on a WALKMAN® compatible with High-Resolution Audio formats
You can connect a WALKMAN® compatible with High-Resolution Audio formats to the speaker with an optional High-Resolution Audio USB Adaptor WM-PORT Cable.
The speaker receives unconverted digital audio data, which is converted to analog data through the digital-to-analog converter of the speaker before being output.
-
Connect the WALKMAN® compatible with High-Resolution Audio formats to the USB port.
-
Press the FUNCTION button repeatedly until the USB indicator lights up.
The speaker enters the USB mode.
-
Operate the WALKMAN® compatible with High-Resolution Audio formats to start playback and adjust the volume to a moderate level.
-
Press the –/+ (volume) buttons to adjust the volume.
When you press the –/+ (volume) buttons, the
(power) indicator flashes once or three times according to the volume adjustment.
To enjoy a more dynamic sound
Pull the lever on the bottom of the speaker in the direction of the arrow shown in the illustration below to remove the grille.*
*After removing the speaker grille, do not touch the exposed part of the speaker (speaker units), and keep the removed grille on a flat surface to prevent distortion.
Note
- The speaker supports only audio playback functions of WALKMAN®.
- Sony is not responsible for loss or damage of data in a WALKMAN® that is connected to the speaker.
- Correct operation is not guaranteed, even for a supported WALKMAN®.
- Depending on the WALKMAN®, dynamic normalizer, equalizer, VPT, DSEE HX and speaker output optimizer may be set to on (or adjusted). If the sound is distorted, set these functions to off.
- When the WALKMAN® is connected, sound is not output from its headphone jack.
