Reading the Indicator
The POWER or WARNING indicator lights up or flashes if there is any trouble with your projector.
If there is any problem or an error message appears on the screen, refer to “Error Handling.”
VPL-XW7000/VPL-XW6000
VPL-XW5000
POWER: Lights in red, WARNING: Flashes in red
VPL-XW7000/VPL-XW6000
VPL-XW5000
Number of flashes: Three times
The unit does not light properly due to an abnormality of the light source and light source power. Turn off, then turn on the power after a while.
If the symptom persists, consult with qualified Sony personnel.
POWER: Flashes in red, WARNING: Flashes in red
Both flash simultaneously.
VPL-XW7000/VPL-XW6000
VPL-XW5000
Number of flashes: Twice
The internal temperature is unusually high. Check to ensure that nothing is blocking the ventilation holes and the unit is not being used at high altitudes.
Number of flashes: Three times
The fan is broken. Consult with qualified Sony personnel.
Note
- If the symptom persists even after carrying out the above methods, consult with qualified Sony personnel.
If the indicator starts flashing in a way of other than the above, turn off, and then turn on the power with the
/
(Power) button on the remote control or control panel of the unit.
If the symptom is shown again, consult with qualified Sony personnel. - The indicator name and appearance may differ from the name and appearance of the indicator on the projector depending on your sales region, model, time of purchase, etc.
