Menu Operation: 3D Settings > 2D-3D Display Sel. (VPL-XW7000/VPL-XW6000)
You can configure 3D display settings.
-
Press the MENU button.
-
Select
[Function] - [3D Settings] - [2D-3D Display Sel.] - the desired setting.
Settings
[Auto]
3D images are displayed when HDMI signals with 3D information are input. 2D images are displayed when other signals are input.
[3D]
3D images are displayed according to the 3D format selected in [3D Format]. However, when HDMI signals with 3D information are input to the unit, 3D images are displayed according to the 3D format of those HDMI signals.
[3D Format]
When the input HDMI signals do not include 3D information, it sets the format to use for displaying the image in 3D.
- [Side-by-Side]: Two similar 3D images are displayed side by side.
- [Over-Under]: Two similar 3D images are displayed one above the other.
Hint
- 3D information is additional information to differentiate 3D. Some HDMI signals have additional information to differentiate 3D and some HDMI signals have none.
- You cannot set [2D-3D Display Sel.] to [3D] for some image sources. For available 3D signals, see “Compatible 3D Signals.”
- The simulated 3D feature may have limited effect depending on the screen size (100 to 120-inch screen is recommended) and the image source.
- The menu display may have a ghost image while a 3D image is displayed. In that case, operate the menu with the 3D glasses.
- You can also set [2D-3D Display Sel.] with the 3D button on the remote control.
