Menu Operation: Network Setting
You can configure Internet protocol settings.
-
Press the MENU button.
-
Select
[Installation] - [Network Setting] - the desired setting.
Settings
[IPv4 Setting]
- [IP Address Setup]: You can select the IP address setting method.
- [Auto(DHCP)]: Network settings are automatically assigned by the DHCP server functions such as the router.
- [Manual]: Network settings are configured manually. Select the desired item with the
/
(Left/Right) button, and enter the value with the 
/
(Up/Down) button.
When all items have been entered, select [Apply], then press the
(Enter) button. The entered settings are applied.
- [IP Address]: The IP address of the projector is set.
- [Subnet Mask]: The subnet mask of the projector is set.
- [Default Gateway]: The default gateway of the projector is set.
- [MAC Address]: The MAC address of the projector is displayed. This cannot be changed.
- [Apply]: It enables the IP address that has been set manually.
[IPv6 Information]
The IPv6 address information is displayed. Set the IPv6 address from a web browser.
