Specifications
VPL-XW7000/VPL-XW6000
Projection System
3 LCD system
Display device
Size of effective display area: SXRD 0.61-inch (15.4 mm) × 3
Number of pixels: 3840 × 2160 × 3 pixels
Projection lens
2.1 times zoom lens (motorized), F2.5 to F3.24
Projection image size
60-inch to 300-inch (1,524 mm to 7,620 mm)
Light source
Laser diode
Inputs/Outputs
HDMI terminal (HDCP 2.3): 2 system
REMOTE terminal: RS-232C, D-Sub 9-pin (Male)
LAN terminal: RJ45, 10BASE-T/100BASE-TX
USB terminal: Type A, DC 5 V, Max. 500 mA
IR IN terminal: 1 system, mini jack
TRIGGER terminal: 1 system, mini jack, DC 12 V, Max. 100 mA
3D SYNC OUT terminal: 1 system, mini jack
This unit is HDCP-compliant.
Outside dimensions (w/h/d)
460 mm × 210 mm × 517 mm (18 1/8 inches × 8 9/32 inches × 20 11/32 inches)
Mass
Approx. 14 kg (31 lb)
Power requirements
VPL-XW7000
AC 100 V to 240 V, 4.3 A to 2.0 A, 50/60 Hz
VPL-XW6000
AC 100 V to 240 V, 3.6 A to 1.7 A, 50/60 Hz
Power consumption
VPL-XW7000
AC 100 V to 240 V: 420 W
VPL-XW6000
AC 100 V to 240 V: 350 W
Standby power consumption (Standby mode)
0.3 W (When [Remote Start] is set to [Off])
Standby power consumption (Network standby mode)
0.5 W (LAN) (When [Remote Start] is set to [On])
When the LAN terminal is not connected, the unit goes into low power consumption mode (0.4 W).
Operating temperature (Operating humidity)
5°C to 35°C (41°F to 95°F) (20% to 80% (No condensation))
Storage temperature (Storage humidity)
–10°C to +60°C (14°F to 140°F) (20% to 80% (No condensation))
Supplied accessories
Remote control (RM-PJ24) (1)
Size AA (R6) batteries (2)
Lens cap (1)
AC power cord (1)
Setup Guide (1)
VPL-XW5000
Projection System
3 LCD system
Display device
Size of effective display area: SXRD 0.61-inch (15.4 mm) × 3
Number of pixels: 3840 × 2160 × 3 pixels
Projection lens
1.6 times zoom lens (manual), F2.50 to F2.99
Projection image size
60-inch to 300-inch (1,524 mm to 7,620 mm)
Light source
Laser diode
Inputs/Outputs
HDMI terminal (HDCP 2.3): 2 system
REMOTE terminal: RS-232C, D-sub 9-pin (male)
LAN terminal: RJ45, 10BASE-T/100BASE-TX
USB terminal: Type A, DC 5 V, Max. 500 mA
IR IN terminal: 1 system, mini jack
TRIGGER terminal: 1 system, mini jack, DC 12 V, Max. 100 mA
Outside dimensions (w/h/d)
460 mm × 200 mm × 472 mm (18 1/8 inches × 7 7/8 inches × 18 19/32 inches)
Mass
Approx. 13 kg (28 lb)
Power requirements
AC 100 V to 240 V, 3.5 A to 1.5 A, 50/60 Hz
Power consumption
AC 100 V to 240 V: 295 W
Standby power consumption (Standby mode)
0.3 W (when [Remote Start] is set to [Off])
Standby power consumption (Network standby mode)
0.5 W (LAN) (when [Remote Start] is set to [On])
When a LAN terminal is not connected, it becomes a low power consumption mode (0.4 W).
Operating temperature (Operating humidity)
5°C to 35°C (41°F to 95°F) (20% to 80% (no condensation))
Storage temperature (Storage humidity)
–10°C to +60°C (14°F to 140°F) (20% to 80% (no condensation))
Supplied accessories
Remote control (RM-PJ28) (1)
Size AA (R6) batteries (2)
Lens cap (1)
AC power cord (1)
Setup Guide (1)
Design, specifications, and optional accessories are subject to change without notice.
Note
- The values for mass and dimensions are approximates.
- Not all optional accessories are available in all countries and areas. Please check with your local Sony Authorized Dealer.
- Information on accessories in this manual is current as of April 2022.
