Technical specifications

Specifications

Capacity (User available capacity) (*1) (*2)

ICD-SX2000: 16 GB (approx. 12.80 GB = 13,743,895,347 Byte)

Maximum number of recorded files (for a folder) 199 files
Maximum number of files 5,000 files (including folders)
Frequency range
  • LPCM 192 kHz/24 bit: 40 Hz - 45,000 Hz (playback only)

  • LPCM 96 kHz/24 bit: 40 Hz - 40,000 Hz

  • LPCM 44.1 kHz/16bit: 40 Hz - 20,000 Hz

  • MP3 320 kbps: 40 Hz - 20,000 Hz

  • MP3 192 kbps: 40 Hz - 18,000 Hz

  • MP3 128 kbps: 40 Hz - 16,000 Hz

  • MP3 48 kbps(MONO): 40 Hz - 14,000 Hz

Compatible file formats

MP3 (*3) (*4)

  • Bit rate: 32 kbps - 320 kbps (Supports variable bit rate (VBR))

  • Sampling frequencies: 16/22.05/24/32/44.1/48 kHz

  • File extension: .mp3

WMA (*3) (*5)

  • Bit rate: 32 kbps - 192 kbps (Supports variable bit rate (VBR))

  • Sampling frequencies: 44.1 kHz

  • File extension: .wma

AAC-LC (*3) (*6)

  • Bit rate: 16 kbps - 320 kbps (Supports variable bit rate (VBR))

  • Sampling frequencies: 11.025/12/16/22.05/24/32/44.1/48 kHz

  • File extension: .m4a

LPCM (*3)

  • Quantization bit rate: 16 bit

  • Sampling frequencies: 192/176.4/96/88.2/48/44.1/22.05 kHz

  • File extension: .wav

LPCM (*3)

  • Quantization bit rate: 24 bit

  • Sampling frequencies: 192/176.4/96/88.2/48/44.1 kHz

  • File extension: .wav

FLAC (*3)

  • Quantization bit rate: 16 bit

  • Sampling frequencies: 192/176.4/96/88.2/48/44.1/22.05 kHz

  • File extension: .flac

FLAC (*3)

  • Quantization bit rate: 24 bit

  • Sampling frequencies: 192/176.4/96/88.2/48/44.1 kHz

  • File extension: .flac

Bluetooth

Communication method: Bluetooth Standard version 3.0

  • Frequency band: 2.4 GHz band (2.4000 GHz - 2.4835 GHz)

  • Modulation method: FHSS

  • Compatible Bluetooth profile (*7): SPP (Serial Port Profile)

Built-in speaker Approx. 16 mm (21/32 in.) dia.
Input/Output
  • Microphone/External input jack (minijack, stereo)

    Input impedance: approx. 4.0 kΩ

    Input for plug in power, minimum input level 1.5 mV

  • Headphone jack (minijack, stereo)

    Output for 16 - 32 Ω impedance headphones

  • USB connector (Type-A) High-Speed USB compatible

  • Card slot

    microSD memory card slot

Playback speed control (DPC)
  • 1.00 times - 0.25 times: FLAC files with the sampling frequency at 88.2 kHz or higher

  • 2.00 times - 0.25 times: LPCM files with the sampling frequency at 88.2 kHz or higher

  • 3.00 times - 0.25 times: other than the above

Power output 200 mW
Power requirements Built-in rechargeable lithium-ion battery: 3.7 V DC
Operating temperature 5 °C - 35 °C (41 °F - 95 °F)
Dimensions (w/h/d) (not incl. projecting parts and controls)

Approx. 44.0 mm × 120.0 mm × 14.5 mm (1 3/4 in. × 4 3/4 in. × 19/32 in.)

(Width/Height/Depth) (JEITA) (*8)

Mass Approx. 98 g (3 1/2 oz) (JEITA) (*8)
Supplied accessories See Operating Instructions supplied with your IC recorder.
Available accessories (*9)

Electret condenser microphone: ECM-CS3, ECM-TL3

USB AC adaptor: AC-UD20

*1 Some of the built-in memory is used for file management.

*2 Applies when the built-in memory is formatted by the IC recorder.

*3 Not all encoders are supported.

*4 Playback of the MP3 files recorded by the IC recorder is also supported.

*5 WMA Ver.9 is compatible, however, MBR (Multi Bit Rate), Lossless, Professional, and Voice are not supported.

*6 Copyright-protected files are not available for playback.

*7 A Bluetooth profile is a specification that standardizes features of individual characteristics of the Bluetooth device.

*8 Measured value by the standard of JEITA (Japan Electronics and Information Technology Industries Association)

*9 Depending on the region, some of the optional accessories are not available.

Design and specifications are subject to change without notice.