Selecting the Auto Calibration type (Calibration Type)

You can select a calibration type after you have performed the Auto Calibration and saved the settings.

  1. Select [Setup] - [Speaker Settings] from the home menu.
  2. Select [Calibration Type].
  3. Select the setting you want.
    • Full Flat: Makes the measurement of frequency from each speaker flat.
    • Engineer: Sets to “the Sony listening room standard” frequency characteristics.
    • Front Reference: Adjusts the characteristics of all of the speakers to match the characteristics of the front speaker.
    • Off

Note

  • This function does not work in the following cases:
    • Headphones are connected.
    • [Auto Calibration] has not been performed.
    • [Bluetooth Mode] is set to [Transmitter].
    • [DSD Native] is set to [On] and DSD signals are being played back.
    • [Pure Direct] is set to [On].
  • The receiver may play signals at a lower sampling frequency than the actual sampling frequency of the input signals, depending on the audio format.