Focus Area

Selects the focusing area. Use this function when it is difficult to focus properly in the auto focus mode.

  1. MENU → (Camera Settings1) → [Focus Area] → desired setting.

Menu item details

Wide :
Focuses on a subject covering the whole range of the screen automatically. When you press the shutter button halfway down in the still image shooting mode, a green frame is displayed around the area that is in focus.
Zone :
Select a zone on the monitor on which to focus, and the product will automatically select a focus area.
Center :
Focuses automatically on a subject in the center of the image. Use together with the focus-lock function to create the composition you want.
Flexible Spot :
Allows you to move the focusing frame to a desired point on the screen and focus on an extremely small subject in a narrow area.
Expand Flexible Spot :
If the product cannot focus on a single selected point, it uses focus points around the flexible spot as a secondary priority area for focusing.
Lock-on AF :
When the shutter button is pressed and held halfway down, the product tracks the subject within the selected autofocus area. This setting is available only when the focus mode is set to [Continuous AF]. Point the cursor at [Lock-on AF] on the [Focus Area] setting screen, and then adjust the desired area to start tracking using the left/right sides of the control wheel. You can also move the tracking start area to the desired point by designating the area as a flexible spot or expand flexible spot.


List of focus range finder frames

The focus range finder frame differs as follows depending on the shooting mode.

When focusing on a larger area

When focusing on a smaller area

  • When [Focus Area] is set to [Wide] or [Zone] and you aim at a moving subject, the focus range finder frame for “When focusing on a smaller area” may be displayed.
  • When you attach an A-mount lens with a Mount Adaptor (LA-EA1 or LA-EA3) (sold separately) and [AF System] is set to [Phase Detection AF], the focus range finder frame for “When focusing on a smaller area” may be displayed.

When focus is achieved automatically based on the whole range of the monitor

  • When you use a zoom function other than the optical zoom, the [Focus Area] setting is disabled and the focus area frame is shown by the dotted line. The AF operates with priority on and around the center area.

To move the focus area

  • When [Focus Area] is set to [Zone], [Flexible Spot] or [Expand Flexible Spot], if pressing the button to which [Focus Standard] is assigned, you can shoot while moving the focus area using the top/bottom/left/right sides of the control wheel. To change the shooting settings using the control wheel, press the button to which [Focus Standard] is assigned.
  • You can move the focusing frame quickly by touching and dragging it on the monitor. Set [Touch Operation] to other than [Off] beforehand.

Note

  • [Focus Area] is locked to [Wide] in the following situations:
    • [Intelligent Auto]
    • [Superior Auto]
    • [Scene Selection]
    • During Smile Shutter mode
  • The focus area may not light up during continuous shooting or when the shutter button is pressed all the way down at once.
  • When the mode dial is set to (Movie/S&Q Motion) or during movie shooting, [Lock-on AF] cannot be selected as the [Focus Area].
  • When [Focus Area] is set to [Wide] or [Zone], the size of the AF range finder frame may be automatically adjusted according to the subject and the composition as follows:
    • When focusing on a wider area such as a landscape: A larger AF range finder frame is displayed.
    • When focusing on a smaller area such as flowers or small items: A smaller AF range finder frame is displayed.
  • You cannot perform functions assigned to the top/bottom/left/right sides of the control wheel or the custom button 3 while moving the focusing frame.
Go to Page Top