Specifications
Flash unit
| Flash control | Flash control using pre-flash (P-TTL/ADI metering) |
| Wireless method | Radio wireless method |
| Flash coverage | 50 mm (24 mm when the built-in wide panel is used) |
| Continuous flash performance | 40 flashes at 10 flashes per second (Normal flash, flash power level 1/32, 50 mm, rechargeable nickel-metal hydride batteries) |
| Operating temperature | 0 °C to 40 °C (32 °F to 104 °F) |
| Storage temperature | –20 °C to +60 °C (–4 °F to +140 °F) |
| Dimension (w/h/d) (Approx.) | 65.1 mm × 83.5 mm × 91.4 mm (2 5/8 in. × 3 3/8 in. × 3 5/8 in.) |
| Mass (Approx.) | 219 g (7.8 oz) (excluding the batteries) |
| Power requirements | DC 3 V |
| Recommended batteries |
|
Flash interval/number of flashes
The number of flashes indicates the approximate number of flashes available with new batteries before they wear out.
| Flash interval/number of flashes | With alkaline batteries | With nickel-metal hydride batteries |
|---|---|---|
| Flash interval (sec) (*1) | Approx. 0.1 - 6.4 | Approx. 0.1 - 4.1 |
| Number of flashes (times) (*2) | Approx. 110 or more | Approx. 130 or more |
*1 Minimum duration of time before the TEST button lights after the previous flash (Acquired under our measurement conditions.)
*2 Number of flashes at the highest flash power level available in every 30 seconds (Acquired under our measurement conditions.)
Functions in this manual depend on testing conditions at our firm.
Design and specifications are subject to change without notice.
