List of flash settings
While this flash unit is attached to a camera with external flash setting capabilities, you can change the following flash settings:
External flash firing settings
| Setting items | Descriptions | Setting options |
|---|---|---|
| Flash Control Mode | Flash control mode setting | TTL Flash Firing (*)/Manual Flash Firing/Multi Flash Firing/Group Flash Firing |
| Memory recall | Calling up the registered preferences | Off (*)/MR1/MR2 |
| High Speed Sync | High-speed sync setting | On (*)/Off |
| CMD Flash Firing | Flash firing setting of this flash unit that is configured as the commander unit | On (*)/Off |
| Flash Comp. | Flash compensation setting | －3.0 - ＋3.0 (*: ±0.0) |
| Flash Power Level | Flash power level setting | 1/1 (*) - 1/128, Off |
| Flash Interval | Intervals for firing flashes in multi flash firing mode | 1Hz - 100Hz (*: 5Hz) |
| Number of Flashes | Number of flashes to fire in multi flash firing mode | 2 - 100 (*: 10), Continuous |
| Ratio Control | Flash power ratio control setting | On/Off (*) |
|
Ratio Value (A) Ratio Value (B) Ratio Value (C) |
Flash power ratio settings | OFF/1 (*) - 16 |
* Factory default
Note
-
The items and options available for setting vary depending on the flash mode.
-
Performing the reset operation on this flash unit resets the all of the above external flash firing settings to the factory defaults. For the reset operation, see “Resetting the flash firing settings to the factory defaults.”
External flash custom settings
| Setting items | Descriptions | Setting options |
|---|---|---|
| Memory | Registers the current mode or settings. | ‐ |
| Test Flash | Test flash firing setting | Group/1 Time (*)/3 Times/4 Sec |
| TTL Level Memory | Flash power level memory setting in TTL flash firing mode | On (*)/Off |
| Flash Power Lv Step | Flash power level step setting | 0.3EV (*)/0.5EV |
| Receiver Set | Changes the settings of individual paired receiver units. | ‐ |
| Commn. Channel | Wireless channel setting | Auto (*)/CH1-CH14 |
| Disp. Paired Devices | Displays the information about the paired devices. | ‐ |
| Power Save | Power-saving timer setting | 30 Sec/3 Min (*)/30 Min/Off |
| WL Power Save | Power-saving timer setting during wireless flash photography | 60 Min (*)/240 Min/Off |
| Version | Displays the version information about this flash unit and the receiver unit(s). | ‐ |
* Factory default
