Connecting to a paired iPhone

  1. Unlock the screen of the iPhone if it is locked.
  2. Remove the headset from the charging case.

    The headset turns on automatically.

    When the headset has automatically connected to the last connected device, you will hear a notification sound indicating that the connection is established from both headset units (or from the headset unit removed from the charging case when only one headset unit is removed) at the same time.

    Check the connection status on the iPhone. If it is not connected, proceed to step 3 .

  3. Display the devices paired with the iPhone.
    1. Select [Settings].
    2. Touch [Bluetooth].

    3. Touch the switch to turn on the Bluetooth function.

  4. Touch [WF-C700N].

    You will hear a notification sound indicating that the connection is established from both headset units (or from the headset unit removed from the charging case when only one headset unit is removed) at the same time.

Hint

  • The operation above is an example. For more details, refer to the operating instructions supplied with the iPhone.

Note

  • If the last-connected Bluetooth device is placed near the headset, the headset may connect automatically to the device by simply turning on the headset. If this is the case, deactivate the Bluetooth function on the last-connected device or turn off the power.
  • If you cannot connect your iPhone to the headset, delete the headset pairing information on your iPhone and perform pairing again. As for the operations on your iPhone, refer to the operating instructions supplied with the iPhone.
Go to Page Top