Listening to ambient sound during music playback (Ambient Sound Mode)

The microphones built into the left and right headset units make it easier to hear ambient sound. You can hear ambient sound while enjoying music.

To activate the Ambient Sound Mode

Press the button on the left headset unit while the noise canceling function is on.

To change the setting of the Ambient Sound Mode

You can change the settings of the Ambient Sound Mode by connecting the smartphone (with the “Sony | Headphones Connect” app installed) and the headset via a Bluetooth connection.

Voice focus: Unwanted noise will be suppressed while announcements or people’s voices are picked up, allowing you to hear them as you listen to music.

To turn off the Ambient Sound Mode

Press the button on the left headset unit to turn off the Ambient Sound Mode.

Each time the button is pressed, the function switches as follows.


Noise canceling function: ON

You will hear a notification sound from both headset units at the same time.

Ambient Sound Mode: ON

You will hear a notification sound from both headset units at the same time.

About the instruction manual video

Watch the video to find out how to use the Ambient Sound Mode.

https://rd1.sony.net/help/mdr/mov0053/h_zz/

Hint

  • Ambient Sound Mode settings changed with the “Sony | Headphones Connect” app are stored in the headset. Once you change the settings, you can enjoy music with the stored settings just by turning on the Ambient Sound Mode even when the headset is connected to other devices which do not have the “Sony | Headphones Connect” app installed.
  • You can select one of the following on the “Sony | Headphones Connect” app to set how you want the functions to change when you press the button on the left headset unit.
    • Noise canceling function: ON Ambient Sound Mode: ON Noise canceling function: OFF/Ambient Sound Mode: OFF
    • Noise canceling function: ON Ambient Sound Mode: ON
    • Ambient Sound Mode: ON Noise canceling function: OFF/Ambient Sound Mode: OFF
    • Noise canceling function: ON Noise canceling function: OFF/Ambient Sound Mode: OFF

Note

  • Depending on the ambient conditions and the type/volume of audio playback, ambient sounds may not be heard even when using the Ambient Sound Mode. Do not use the headset in places where it would be dangerous if you are unable to hear ambient sounds, such as on a road with car and bicycle traffic.
  • Depending on the surrounding environment, wind noise may increase when the Ambient Sound Mode is turned on. In this case, set the Ambient Sound Mode to OFF.
  • If the headset is not worn properly in your ears, the Ambient Sound Mode may not work correctly. Twist the headset to put it into your ears properly.
  • Do not cover the microphone part on the left or right headset unit with your hand, etc. The effect of the noise canceling function or Ambient Sound Mode may not work properly or a beeping sound (feedback) may occur. If any of this is the case, remove your hand, etc. from the left or right microphone part.
  • If the Ambient Sound Mode is enabled in a rather noisy environment, a noise may be heard. This is not a malfunction. In this case, set the noise canceling function to ON or set the noise canceling function and the Ambient Sound Mode to OFF.
Go to Page Top