Connecting to a paired Bluetooth device

  1. Remove the headset from the charging case.

    The headset turns on automatically.

  2. Put the headset units into both ears.

    When the headset has automatically connected to the last connected device, you will hear a notification sound from both headset units (or from the headset unit you are wearing) at the same time.

    Check the connection status on the Bluetooth device. If it is not connected, proceed to step 3 .

  3. Make the Bluetooth connection from the Bluetooth device.

    As for the operations on your Bluetooth device, refer to the operating instructions supplied with the Bluetooth device.

    You will hear a notification sound from both headset units (or from the headset unit you are wearing) at the same time.

Hint

  • The operation above is an example. For more details, refer to the operating instructions supplied with the Bluetooth device.

Note

  • When connecting, [LinkBuds S], [LE_LinkBuds S], or both may be displayed on the connecting device. When both or [LinkBuds S] is displayed, select [LinkBuds S]; when [LE_LinkBuds S] is displayed, select [LE_LinkBuds S].
  • If the last connected Bluetooth device is placed near the headset, the headset may automatically connect to the device when you turn on the headset and may not connect to another device.
    If this occurs, cancel the Bluetooth connection on the last connected device.
  • If you cannot connect your Bluetooth device to the headset, delete the headset pairing information on your Bluetooth device and perform the pairing again. As for the operations on your Bluetooth device, refer to the operating instructions supplied with the Bluetooth device.